• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Is this 10.1 compression ratio

  • Thread starter Thread starter HeavyBreather
  • Start date Start date Jul 16, 2007
H

HeavyBreather

New Member
Dec 2, 2006
14
0
0
Jul 16, 2007
#1
  • Jul 16, 2007
  • #1
I am wanting to get 10.1 or more. I have a 88 stock shortblock that is fresh with stock pistons stock deck height. I am putting a pair of heads that have a 58cc chamber on them. Will this give me the compression ratio I want? This car is a strip car only and will the e cam or tfs1, or 2 cam be the best. The car is a 5 speed with a 4.10 gear.
 

poneypower89

Now everyone in the world will know I wanna bang t
Dec 6, 2004
0
3
28
Indianapolis, Indiana
Jul 16, 2007
#2
  • Jul 16, 2007
  • #2
Using my compression calculator program...

If you are running a flat top pistion with the stock crank stroke and rod length..

58 cc heads and .025 thickness head gaskest should yeild you 10.7:1 compression.

so many variables can play into ur compression ratio though... but yes.. u should be in the 10:1 or better range.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jul 16, 2007
#3
  • Jul 16, 2007
  • #3
HeavyBreather said:
I am wanting to get 10.1 or more. I have a 88 stock shortblock that is fresh with stock pistons stock deck height. I am putting a pair of heads that have a 58cc chamber on them. Will this give me the compression ratio I want? This car is a strip car only and will the e cam or tfs1, or 2 cam be the best. The car is a 5 speed with a 4.10 gear.
Click to expand...
You need the following info to do a decent job of calculating the Static CR...
  • Combustion Chamber size
  • Piston Diameter
  • Height to 1st Ring
  • Deck Height
  • HG Thickness
  • Head Gasket Diameter
  • Dish Volume of Piston
  • Stroke
  • Cylinder Bore Diameter
This will give you Quench Height and CR.

I can email you my excel spreadsheet if you would like, or there are tons of calculators on-line.


The 'BEST' cam is going to be a custom grind.
Second best option is to have Jay Allen recommend an OTS cam.
Your third best option is what you have mentioned above.


good luck,
jason
 
You must log in or register to reply here.

Similar threads

S
Speedometer Calibration
  • Sonny Bibb
  • Sep 11, 2026
  • Digital Self-tuning Forum
Replies
4
Views
366
Digital Self-tuning Forum Sep 13, 2026
Sonny Bibb
S
J
Intake
  • James S
  • Jul 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
308
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 12, 2026
James S
J
F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
498
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?