Isky Cam ?

Mopar1

Member
Oct 28, 2002
61
0
6
Shelton, WA
Any feed back on anyone running this cam or comments in general.

http://store.summitracing.com/partde...5&autoview=sku

Intake Duration at 050 inch Lift: 210
Exhaust Duration at 050 inch Lift: 218
Duration at 050 inch Lift: 210 int./218 exh.
Advertised Intake Duration: 257
Advertised Exhaust Duration: 265
Advertised Duration: 257 int./265 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.480 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Valve Lift with Factory Rocker Arm Ratio: 0.480 int./0.500 exh. lift
Lobe Separation (degrees): 112
 
My first thought is that seems like a pretty mild cam. Not a lot of duration on either lobe, and it only makes power to 5600 RPM. Your link doesn't work, by the way. Is this the cam you're referring to? http://store.summitracing.com/partdetail.asp?part=ISK-371257-265&autoview=sku

Edit: I also just noticed that it uses the 302 firing order, not the 5.0 HO/351W firing order. Is this going to be used with EFI? It won't work unless you can change the order that the injectors pulse somehow, without rewiring your harness.
 
I have an Iskenderian cam in my car (custom grind) but it's close to this cam. Grind RR-265 HYD, RR-275 HYD. It makes great power and passes emissions here in NJ. (w/ smog pump) Idles real nice (slightly lopey) and goes to 6500.

Int lift .500
exh lift .520
lobe sep 112
cam is cut w/ 3* advance