J&M Products : Forum Sponsor : Updates

J&M Products would like to take this opportunity to inform everybody we have decided to sponsor and help support stangnet.com. We feel it is very important to support forums which help the general public in the way stangnet.com does. We have also decided to specifically sponsor the 4.6L forums and would be willing to help answer any suspension related technical questions you have. We are available by phone, email, or pm so please does not hesitate to ask.

Newest Product Release

Fits: 1994-2004 Ford Mustangs

Camber/Caster Plates:

Do you need to take control of your Mustangs front suspension? You can do it by using a set of J&M Products adjustable caster and camber plates. J&M plates replace the stock rubber strut mount bushings with a chrome-moly spherical bearing, allowing you full control of the front suspension alignment. Whether you want your alignment set for track, street, or strip, these plates will allow you to fine tune your alignment so you can get the most out of your car. The bearing mounts are completely adjustable and are 100% high frequency pulse welded for the ultimate in strength, durability, and fit. These camber/caster plates also feature a special chrome moly replaceable Teflon lined spherical bearing for a noise free quality ride. J&M Camber/Caster plates are now coming with a LIFETIME WARRANTY which covers bearing failure, main plate bending, or just over abuse. That is right if you are the original owner and bend the plates or wear out the bearings they will be fixed or replaced for free. That is how confident we are that you are purchasing the best camber plates available.

J&M Products plates include the following features:

-LIFETIME GUARANTEE against bearing failure and main plate bending or breaking.
-Slots for adjusting caster and camber independently from each other.
-Easy adjustment for Street and Race applications without the need for taking apart and rotating the camber plate.
-Replaceable highest strength chrome moly Teflon-lined spherical bearings for noise free performance.
-Greatest increase in suspension travel for lowered cars.
-Powder coated for great looks and long lasting protection.
-4 bolt option for the 94-04 Mustangs vehicles for coil-over use.
-Alloy steel main support plate for ultimate strength.
-Press in studs allow for more suspension travel clearance on coil-over applications over any other design available.
-Bearings and bearing mounts are loaded and supported from the bottom to remove the load from the hardware.

tomustang said:

Good Luck on your journey, you have the best offer in which several other companys do not honor that.

Click to expand...

Thank you, we where the first to start offering the lifetime warranty on our camber plates and a few have followed suite. Its not a big issue if you use quality parts and material from the start.

New OEM Fit Stainless Steel Brake Hoses

J&M Products is proud to announce the release of these new direct fit D.O.T. certified Teflon lined brake hoses. These brake hose assemblies use true OEM style direct replacement non-universal fittings to achieve proper factory hose routing and fitment. Expansion of stock rubber hoses causes a spongy brake pedal feel and loss of initial braking force. Installation of our Teflon-lined stainless steel hose assemblies will give your car a firmer pedal, quicker braking response, and easier brake modulation. Every hose is tested to 3000 psi to guarantee a leak free hose assembly. Best of all these are made by J&M Products right here in the USA.

Benefits:

- Direct OEM fit
- Quicker brake response
- Better brake modulation
- Every hose is pressure tested to 3000 psi.









Rear hoses and 94-98 hoses in engineering and soon to be released. To order visit www.hotpart.com

We have finally come out with our new DOT legal direct replacement stainless steel Teflon lined brake hoses for the rear of the 94-04 Mustangs. They can be ordered online at www.hotpart.com or through one of our dealers.











These are the only true DOT legal Stainless Teflon Lined brake hoses on the market that mount exactly like the factory hoses.

hollywoodstang said:

Do you make your own stuff in-house? or are you importing them? Are these all your company's design? with R&D? or are you copying from someone else design?

Click to expand...

Everything is manufactured in house and everything goes through an R&D process before we release our parts to the general public.

These days everyone gives "Lifetime warranty" BUT do you really honor them? When the time comes DO YOU "blame" the customer and turn-down the warranty?

Are you using receipt and keep your copy system to honor the warranty? or do you actually file the customers who bought your item? Do we have to fill out one of those warranty card?

Only people who actually came through this "Warranty" claim was Flowmaster and edelbrock and HPM.

All other company including UPR, steeda, MM, Bleh bleh too many to name "Big" company out their do not keep their "Word"

And oh "Yes" i break parts all the time. I have small garage so i have seen some "Tuned" cars break parts that i would never break. But hey why in the world would you get aftermarket upper & lower control arms and camber kit if you are not going "Racing" right?

Click to expand...

We do honor our lifetime warranty if a part fails. We do need proof of purchase if you did not order it directly from us because we will not have the record of your purchase. The other reason will need proof of purchase is we have had some other companies (one especially you mentioned in your non warranty company names) copy our parts with inferior material and the customers came to us for warranty when they failed or started to rattle. With all that said our parts are designed for street use but it has never stopped us from a warranty on a race car unless there was clear neglect.

Are your camber plates safe to use with "Coil-overs"? since it's 4 bolt design i am asking if it's recommended or not.

Click to expand...

Yes our camber plates are designed to be used with coil-over kits. You must use the 4th bolt option on the 94-04 plates.

I probably pick up couple parts from you just to see. BUT if any of your part break at the track that's another story.

I live in california too. So I AM interested in your parts since you are local.

Click to expand...

We would be happy to help you out with your suspension parts needs. I would recommend calling us so we can talk about what your needs are so we can recommend the correct parts for your application.

Good luck with your business

Click to expand...

We have been in business for over 15 years now, as you know you can make it that long without good customer service.

You will need the kit for the anti-lock brakes.

rhyrlik said:

Hi,

I want to upgrade my 2002 GT brakes to Cobra spec. Do your 1999-2004 brake lines fit Cobra calipers?

Click to expand...

We have never done that conversion but as far as I can you would want to use the 99-04 GT rear hose.