Just Bought A 5.4 SOHC!

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Nov 16, 2005

#1

• Nov 16, 2005

• #1

As I posted about 2 months ago, my friend had a 5.4 Liter SOHC for sale. It has PI 4.6 Heads and has all wiring harness, ect. I bought the motor for $500. I am going to build the motor, then when my motor gets weak i will put it in my car. This way I wont have a deadline and have to get the motor done. I am looking to start the project soon. What crank, rods, pistons, bearings would be the best? The motor is going to be Sprayed so I need it to take nitrous with no problems. I was thinking valve train : VT Stage III's, Comp Cams Valve springs and more! Also I will probably need a really good tuner like SCT to help me tune when i get the motor in. What do you guys think?

 

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Nov 16, 2005

#2

• Nov 16, 2005

• #2

here could be the bottom end as of today:

The Shopping Cart Contains:
Total Items: 7 Weight: 66lbs Amount: $591.00


Clevite 4.6/5.4 Rod Bearings (STD)
$39.00

VT Billet Trigger Wheel
$89.00

Federal Mogul Main Bearing - 5.4 (STD)
$45.00

Canton Windage Tray - 5.4
$80.00

FRPP H/V Oil Pump & Pickup
$69.00

Canton Steet Strip 7qt Oil Pan
$269.00

Sub-Total: $591.00

Should I go with this or what is your suggestions? Only going with Bottom End right now!

 

billfisher

Active Member

Jul 17, 2005

1,296

4

38

huntsville, AL

Nov 16, 2005

#3

• Nov 16, 2005

• #3

better get a big cowl hood for that.

 

RedDaemon

10 Year Member

Mar 31, 2005

3,470

9

108

Atlanta, GA

Nov 16, 2005

#4

• Nov 16, 2005

• #4

billfisher said:

better get a big cowl hood for that.

Click to expand...

 

jasonh_86

I

May 20, 2005

1,156

2

48

Arkansas

Nov 16, 2005

#5

• Nov 16, 2005

• #5

pughman might know where to get a big cowl hood

 

T

tjm73

Founding Member

Aug 3, 2000

2,418

2

48

Rush, NY

Nov 16, 2005

#6

• Nov 16, 2005

• #6

A lot of 5.4's came with steel cranks if they were in HD trucks. No need to buy a cast crank as that's the low end, standard factory crank. But it's still plenty strong. If the crank has 8 bolts fro the flexplate it may very well be a factory steel crank.

 

D

Drag_on

New Member

Oct 12, 2005

24

0

0

Nov 16, 2005

#7

• Nov 16, 2005

• #7

All the windage trays I have seen for the 4.6L blot to the main girdles, so you may need to add that to your list. The one at DSS was like $370.00. But I don't know. Someone please correct me if I am wrong and let me know where to find a windage tray for our motors that can bolt right up or use other main bolts.

 

billfisher

Active Member

Jul 17, 2005

1,296

4

38

huntsville, AL

Nov 16, 2005

#8

• Nov 16, 2005

• #8

-=NightHawk=- said:

Click to expand...

 

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Nov 17, 2005

#9

• Nov 17, 2005

• #9

yeh the motor was out of a 1998 or so, Ford F-250. So it should have the steel crank.

 

T

tjm73

Founding Member

Aug 3, 2000

2,418

2

48

Rush, NY

Nov 17, 2005

#10

• Nov 17, 2005

• #10

mustangman9812 said:

yeh the motor was out of a 1998 or so, Ford F-250. So it should have the steel crank.

Click to expand...

It may indeed.

What are you gonna do for an intake? Are you gonn apoke around and find intake spacers for a PI intake, or do you have some other plan?

 

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Nov 17, 2005

#11

• Nov 17, 2005

• #11

I am going to buy a New PI Intake, 24lb Injectors and put it on the motor (I am deffinetly not going to run the truck intake). Then I will probably run a BBk Plenum and a 75mm Throttle Body. Is this what you mean?? sorry got kinda confused

 

mustangman9812

10 Year Member

Jan 14, 2004

661

6

49

Mars Hill, NC

Nov 17, 2005

#12

• Nov 17, 2005

• #12

where is a good place to buy 5.4 Liter Pistons and Rings at a Decent Price? I checked VT Engines and they only have 2 companies to choose from and they are pretty high.

 

T

tjm73

Founding Member

Aug 3, 2000

2,418

2

48

Rush, NY

Nov 17, 2005

#13

• Nov 17, 2005

• #13

mustangman9812 said:

I am going to buy a New PI Intake, 24lb Injectors and put it on the motor (I am deffinetly not going to run the truck intake). Then I will probably run a BBk Plenum and a 75mm Throttle Body. Is this what you mean?? sorry got kinda confused

Click to expand...

Ok. You do realize the PI intake is not a direct bolt on right?

 

billfisher

Active Member

Jul 17, 2005

1,296

4

38

huntsville, AL

Nov 17, 2005

#14

• Nov 17, 2005

• #14

also PI volume is way too low. it will fit though.

 

T

tjm73

Founding Member

Aug 3, 2000

2,418

2

48

Rush, NY

Nov 17, 2005

#15

• Nov 17, 2005

• #15

Does a blow by blow pictorial of this swap exist anywhere?

Does anyone sell, or offer the plans for, the spacer/adapters for the intake?

 

billfisher

Active Member

Jul 17, 2005

1,296

4

38

huntsville, AL

Nov 23, 2005

#16

• Nov 23, 2005

• #16

i believe reichard racing sells the plates. but consider using a 4.6 4v intake instead. you give up too much power with a small pi.