• Community Forums
  • Regional Forums and Event Information

JUST COURIOUS? WHAT DO YOU PLAN TO LAY DOWN NEXT YEAR

  • Thread starter Thread starter SMOKEDYA
  • Start date Start date Nov 15, 2004
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 3 of 4 Next Last

gasketmaster

Founding Member
Jan 29, 2002
167
0
17
Portland,Oregon
Nov 18, 2004
#41
  • Nov 18, 2004
  • #41
WaterPog said:
I haven't been able to find a formal statement from the NHRA
Click to expand...

This is directly from the NHRA website:

Beginning Jan. 1, 2005, a roll bar and an SFI 16.1 driver-restraint system will be mandatory on any vehicle running 11.49 or quicker and for convertibles running 13.49 or quicker. An SFI 3.2A/1 jacket will be mandatory for all drivers in vehicles running between 10.00 to 11.49 seconds.
 

redrumracing01

New Member
Nov 18, 2004
250
0
0
bellvue,wa
Nov 18, 2004
#42
  • Nov 18, 2004
  • #42
some way or another im running 12s,lots of n2o on stock bottom end
if nessisary gettin 86 lx notch for $50 will switch all v8 stuff from my
88gt by summer
 

TheRedBlur

Active Member
Jul 7, 2003
15
0
38
seattle
Nov 19, 2004
#43
  • Nov 19, 2004
  • #43
well, I hope to lay down a lot of honey's lol. but knowing me and my prudish ways, mabye like one or two. lol
 

saleenster

Founding Member
Aug 18, 2002
2,621
0
47
Vancouver, WA
Nov 20, 2004
#44
  • Nov 20, 2004
  • #44
I just want to see my good buddy Chung louie present next yr
 

gasketmaster

Founding Member
Jan 29, 2002
167
0
17
Portland,Oregon
Nov 20, 2004
#45
  • Nov 20, 2004
  • #45
saleenster said:
I just want to see my good buddy Chung louie present next yr
Click to expand...

I wouldn't be holding my breath
 

saleenster

Founding Member
Aug 18, 2002
2,621
0
47
Vancouver, WA
Nov 20, 2004
#46
  • Nov 20, 2004
  • #46
gasketmaster said:
I wouldn't be holding my breath
Click to expand...


If I was, I'd already be dead
 

loud 95

New Member
May 29, 2003
562
0
0
Milwaukie, OR
Nov 20, 2004
#47
  • Nov 20, 2004
  • #47
My truck should be somewhere in the 14's, as it is shaped like a box and will be lifted with 33 inch tires. As for the stang...somewhere in the low nines, pending me not blowing it into a wall...The real issue is getting all the work done in time. First I have to finish the school year!
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Nov 20, 2004
#48
  • Nov 20, 2004
  • #48
Runz9z_ said:
Now that i am getting used to this internet stuff I am going to post for myself. My plansfor this year is to spray my 499cid until the heads come off. Pretty much just to destroy as many mustangs as possible. If i seem a little mean right now it's because of the captain.
Click to expand...
typical chevy guy so it sounds like you plan on blowing it up doing so? oh well no loss peace



john
 

Red5.0

Founding Member
Nov 12, 2000
318
0
0
Brookings Oregon
Nov 21, 2004
#49
  • Nov 21, 2004
  • #49
Im hopin for low 10's myself.
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Nov 22, 2004
#50
  • Nov 22, 2004
  • #50
loud 95 said:
My truck should be somewhere in the 14's, as it is shaped like a box and will be lifted with 33 inch tires. As for the stang...somewhere in the low nines, pending me not blowing it into a wall...The real issue is getting all the work done in time. First I have to finish the school year!
Click to expand...
SWEET!!!! that makes 2 possible 3 stangs here on the west coast to hit in the 9's bout time someone out here hit's 'em sold! after all look in all the mags and 9's are like running 12's out here from back east ????? WTF is our prob.?????? it is kinda of funny that the post posted a few weeks ago bout who makes what that alot of you responded that you make close if not 6 figure's a year ????? so why dont you guy's build a car to run in the 9's easly or the 8's 7's ???????? come on put youre money where youre mouth's are !!!! if i made the figures that you claim you are then you can bet i'd be in the 8's or atleast the 9's. we are hoping to hit very low ??'s and we only make combined 60g's a year good luck. peace



john
 
A

AllFordPerf

New Member
Nov 22, 2003
252
0
0
Vancouver,Washington
Nov 22, 2004
#51
  • Nov 22, 2004
  • #51
SMOKEDYA said:
SWEET!!!! that makes 2 possible 3 stangs here on the west coast to hit in the 9's bout time someone out here hit's 'em sold! after all look in all the mags and 9's are like running 12's out here from back east ????? WTF is our prob.?????? it is kinda of funny that the post posted a few weeks ago bout who makes what that alot of you responded that you make close if not 6 figure's a year ????? so why dont you guy's build a car to run in the 9's easly or the 8's 7's ???????? come on put youre money where youre mouth's are !!!! if i made the figures that you claim you are then you can bet i'd be in the 8's or atleast the 9's. we are hoping to hit very low ??'s and we only make combined 60g's a year good luck. peace



john
Click to expand...


It takes more than money to build a 9 second car!
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Nov 22, 2004
#52
  • Nov 22, 2004
  • #52
AllFordPerf said:
It takes more than money to build a 9 second car!
Click to expand...
true. there is prob. tons of factor's but money does help? does chung sell steeda billet or upr ? do you know? peace


john
 

SMOKEDYA

20+ Year Stangneter
Jul 13, 2003
3,637
8
79
Tucson AZ
Nov 22, 2004
#53
  • Nov 22, 2004
  • #53
jeff is it any cheaper to do gears if the rearend is out of the car? either way what is the cost? the rearend will be out and were looking to go with 4.10's. peace


john
 

gasketmaster

Founding Member
Jan 29, 2002
167
0
17
Portland,Oregon
Nov 22, 2004
#54
  • Nov 22, 2004
  • #54
AllFordPerf said:
It takes more than money to build a 9 second car!
Click to expand...

Yeah but not everybody owns a Sawzall
 
A

AllFordPerf

New Member
Nov 22, 2003
252
0
0
Vancouver,Washington
Nov 22, 2004
#55
  • Nov 22, 2004
  • #55
gasketmaster said:
Yeah but not everybody owns a Sawzall
Click to expand...

The sawzall is to saw your azz off Terry! Everyone knows I use a plasma cutter for my weight reduction.

Jon, it is actually easier to do the gears in the car but there is no price difference. I think Chung carries Steeda Bling parts.
 

gasketmaster

Founding Member
Jan 29, 2002
167
0
17
Portland,Oregon
Nov 22, 2004
#56
  • Nov 22, 2004
  • #56
AllFordPerf said:
The sawzall is to saw your azz off Terry!
Click to expand...




Good shot Jeff
 
B

breakemlose

Founding Member
Feb 27, 2002
244
0
0
Mexico
Nov 22, 2004
#57
  • Nov 22, 2004
  • #57
I plan to lay down 700+ wheel horsepower to the ground. Clocking 137mph+ in the 1/4.


OH and a 18 year old hotty blonde.
 

WaterPog

Founding Member
Mar 12, 2001
2,201
0
0
Portland, OR
Nov 22, 2004
#58
  • Nov 22, 2004
  • #58
breakemlose said:
I plan to lay down 700+ wheel horsepower to the ground. Clocking 137mph+ in the 1/4.


OH and a 18 year old hotty blonde.
Click to expand...
You gonna put an Auto in the Supra?

Hell, go all out with it if you can, you could be the quickest supra in the country if you wanted to. One of the few who wouldn't be afraid to put an automatic in it!
 
T

Turbosnake95-wk

New Member
Apr 20, 2004
94
0
0
Nov 22, 2004
#59
  • Nov 22, 2004
  • #59
For next season I'm gonna go as fast as 92 Octane will let me go.
 

ZeroCool

Active Member
Oct 13, 2003
1,264
0
37
San Diego, CA
Nov 23, 2004
#60
  • Nov 23, 2004
  • #60
I plan on geting the damn car across the finish line without breaking something!
 
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 3 of 4 Next Last
You must log in or register to reply here.

Similar threads

What's Your New Year Project Plans?
  • Habu135
  • Jan 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
780
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Habu135
5
Foxbody Intro
  • 5.0Sucio
  • May 26, 2026
  • The Welcome Wagon
Replies
1
Views
116
The Welcome Wagon May 26, 2026
Noobz347
Exhaust April is the worst month
  • Enzio
  • Mar 4, 2026
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
213
1974 - 1978 Mustang II Talk & Tech Mar 7, 2026
LILCBRA
Strut Tower Help!
  • 93Nifty
  • Jan 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
28
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
General karthief
B
2001 roush stage 3 - sat for 5 years
  • Brando_05
  • Aug 26, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
262
1996 - 2004 SN95 Mustang -General/Talk- Aug 26, 2025
Brando_05
B
Share:
Bluesky Email Share Link
  • Community Forums
  • Regional Forums and Event Information
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?