Just got a Tremec TKO 500!!!

stangbear427 · Aug 10, 2004

astronut1885 said:
Also, the tranny has internal shift stops, so you really don't need an aftermarket shifter, and on top of that the review by 5.0 Mustang & Super Fords said the 500's shifter felt as good as any aftermarket. I don't even thing there's a shifter on the market for that tranny yet.

I think it has the same bolt pattern as the old TKO's, but I'm not sure. It's true, it has internal gear stops, just like all the big Tremecs do. That doesn't mean they don't all need a different shifter to protect the internals, it only means they don't need one to protect the gears from over engagement. Those stops do nothing for all the linkage between the shifter and the gears, which are still subject to big time shock loading. It's for this very reason that Steeda (much as I hate to plug them ) have developed a positive stop kit for the TTC shifter that comes on it.

90mustangGT · Aug 12, 2004

I called Tremec and they told me the TKO and the TKO 500/600 have different shifters and no one makes one yet. He told me the stops are good but not good for banging gears, but there is a company that makes a kit that installs stops like on most shifters. I'll be ordering one before I go racing.

The companies number is 1-800-771-6843 can't remember the name.

bmo37 · Aug 12, 2004

i actually like the 500 shifter, I bought a upr aluminum lever widened the holes a small amount and it works great.

stangbear427 · Aug 12, 2004

90mustangGT said:
I called Tremec and they told me the TKO and the TKO 500/600 have different shifters and no one makes one yet. He told me the stops are good but not good for banging gears, but there is a company that makes a kit that installs stops like on most shifters. I'll be ordering one before I go racing.

The companies number is 1-800-771-6843 can't remember the name.

This sounds familiar. Look at my post again.

stangbear427 · Aug 14, 2004

As it turns out, TTC has just let the cat out of the bag about their new 500/600 shifter. It's made for them by Hurst.
The only reason that it doesn't include adjustable positive stops is that many people don't know how to set them properly. The rumors about them being bad for Tremecs and blowing them up has nothing to do with the stops themselves, or the inherent need for them- but rather in common incompetence. If they are set too close, it prevents the gears from fully engaging. Well, of course that will cause a problem! So basically they stupid-proofed it, and hope you won't pound it too hard. BTW, that piece of info strait from TTC, not just my opinion.

jocko · Aug 14, 2004

hey 90mustang gt did you have to center that new bellhousing like the blowproof ones or did you just put it on?

Thunder5.0 · Dec 7, 2004

Is it easy to swap yokes on the driveshaft?

TT91 · Dec 7, 2004

Thunder5.0 said:
Is it easy to swap yokes on the driveshaft?

Yep, u need a press to do it, takes about 10 mins

Just got a Tremec TKO 500!!!

stangbear427

Active Member

90mustangGT

I felt sorry for girls because

bmo37

stangbear427

Active Member

stangbear427

Active Member

jocko

Member

Thunder5.0

New Member

TT91

Active Member

Similar threads

Just got a Tremec TKO 500!!!

Active Member

I felt sorry for girls because

Active Member

Active Member

Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency