• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

just noticed a small problem

  • Thread starter Thread starter Shirley
  • Start date Start date Feb 20, 2006
S

Shirley

Founding Member
Nov 14, 2001
112
0
0
Phoenix, AZ
Feb 20, 2006
#1
  • Feb 20, 2006
  • #1
i just took my car out to the convenient store, probably like a 5 mile round trip, and on the way home r. I heard a consistent squeeling noise and a slight I guess you could say burning rubber smell from the front of the car. I am guessing it is the fan belt. Well I went to take it off, and it wont come off. I pulled the idler pulley all the way back and the belt still has no slack in it. When I installed my 3G alternator, I used the pulley that came on it. The belt was a little tight when I installed it, but there was still some slack so i could pull it over the alternator pulley. There is also a slight glaze on the non ribbed side of the belt. Should I just cut the damn thing off?, and does anyone know the exact length of a slightly longer fan belt that I can use with with the stock pulley setup (P/S A/C W/P ALT SMOG IDLER CRANK)? Or should I just buy another stock length? Any help is appreciated.
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Feb 20, 2006
#2
  • Feb 20, 2006
  • #2
It can't just all of a sudden require a smaller belt unless something has moved. Check that your new alternator is still mounted properly.
 
S

Shirley

Founding Member
Nov 14, 2001
112
0
0
Phoenix, AZ
Feb 20, 2006
#3
  • Feb 20, 2006
  • #3
just checked, hasn't moved. I thought belts could stretch? Any other ideas? I haven't touched the fan belt for about 3 months.
 
S

Shirley

Founding Member
Nov 14, 2001
112
0
0
Phoenix, AZ
Feb 20, 2006
#4
  • Feb 20, 2006
  • #4
i got the belt off, and it definitely will not go back on. The pulleys really look to be all aligned, I know that even a small amount off will cause problems, but wouldn't this problem have reared its ugly head earlier?
 

fox racer

Member
Jun 22, 2004
577
0
16
Staten Island, NYC
Feb 20, 2006
#5
  • Feb 20, 2006
  • #5
DAMN a 5 mile trip to the local convenient store? that sucks lol sry i have nothing to contribute
 
S

Shirley

Founding Member
Nov 14, 2001
112
0
0
Phoenix, AZ
Feb 20, 2006
#6
  • Feb 20, 2006
  • #6
well i could have gone to the $h1ty one, but its about principles.
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Feb 20, 2006
#7
  • Feb 20, 2006
  • #7
did you make sure the belt is proprly routed?? other than that and a new belt if nothing else has changed it should work
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 20, 2006
#8
  • Feb 20, 2006
  • #8
I also think something else happened. The belt was not tight when you installed the 3G (I have installed two 3Gs on the fox and neither significantly changed the stock belt displacement), but now it is. That suggests something happened.
I have the feeling that in daylight you will be able to spot the issue. Make sure to spin each accessory by hand to be sure they all spin freely. Look for discolored or glazed pulleys.

It's hard for us to offer advice (I am sure you are rolling your eyes at my post, but I miss things that are out of whack all the time, so I know it happens - and to me more than others ) since this is one of those things where you just gotta size it up yourself.

My two cents. Good luck.
 
You must log in or register to reply here.

Similar threads

W
Electrical 91 GT Alternator Replacement Question
  • willrh111
  • Oct 22, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
512
Fox 5.0 Mustang Tech Oct 23, 2025
nickyb
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
491
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
M
Consistent noise from engine, except when idling
  • Manlaw213
  • Sep 25, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
637
1996 - 2004 SN95 Mustang -General/Talk- Oct 11, 2024
Manlaw213
M
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
688
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
510
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?