Just retrofit my headlights with projectors

OracleHCR

Active Member
Mar 19, 2012
152
23
39
Crestview, Fl
#1
I had a HID kit and wasn't happy with the light scatter and didn't want to blind oncoming drivers so I decided to do something about it. I picked up a kit from retro-solutions and some aftermarket headlights off of eBay.
It took me about 2 hours to retrofit the projectors in the headlight housing and about 30 minutes to install them in the stang.
I think they turned out pretty good.


 
#5
I was hesitant on the HID lights as well, for courtesy sake. I made sure I test drove the car at night as well as during the day and had my brother driving in front of me so I could test out the blinding factor. Turns out the lights are angled very well and didn't bother him one bit, not even the fog lights. Only when I hit the high beams did he take a solar flare to the face. Anyone else test out their HIDs?
 
#7
Thanks but it wasn't professional enough. lol. The passenger side got some condensation in it and I had to take it off and reseal it. Not going to have that problem again though as I siliconed around the entire case this time. While I had it apart I decided to paint the reflectors and shrouds black. It looks 1000 times better IMO.


 
Reactions: 1 user
You must log in or register to reply here.

Similar threads

What's the difference: SS3 vs. Elite Series Fogs | Diode Dynamics
Replies
2
Views
666
Vendor Sponsor Forums
Diode Dynamics
Time for a new clutch
Replies
110
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
2000xp8
J
Electrical No crank no dash no nothing, troubleshooting leads to more questions
Replies
1
Views
2K
1994 - 1995 Specific Tech
Jojam99
J
2004 Mach 1 crank but no start. dying inside
Replies
50
Views
6K
SN95 4.6L Mustang Tech
Mach1.0
M
Foxtoberfest 2022
Replies
31
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Ford Moore
F
Menu
Log in
Register