• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

k, maybe some of you can help me figure this out..........

  • Thread starter Thread starter gopher_6_9
  • Start date Start date Aug 1, 2004
G

gopher_6_9

Member
Jun 16, 2003
55
0
6
Aug 1, 2004
#1
  • Aug 1, 2004
  • #1
k, little background. First it is not a stang but a ranger but we all bleed blue right????? Well it is a carbed 302 bored .040 over, '69 stang heads, mild port and polish (more of a simple polish and a 3 angle valve job), .498 lift @ .050 218 adv duration , Weiand X-Cellerater intake, edelbrock 600, custom h-pipe with cheapy turbos, Complete MSD ignition set to 12 initial because of the N2o setup (never hit the button yet though), etc..

K, here is the deal, when you cruise and it hit about 2500-4000 rom it has a constant stutter....... like it is missing really bad, it goes away if it is floored or if you ease off it and go to just off idle. I have tried everything I can think of, and basically I am at a loose. so any ideas?

1. I was thinking vaccuum leak so i sprayed it with brake clean and couldn't find one, I am going to get a vaccuum gauge on it and see what I can tell

2. Timing........ not sure about that, the only thing I could think of is the total timing being being to little so I may pull the MSD and see what I can do to step it up

3. Fuel delivery problem......... kinda doubt it since it stops if I go to WOT....

EDIT: I just thought of something........ I am running a pcv valve with a breather........ this could be a major vaccum leak couldn't it?
 

Ourobos

Member
Apr 12, 2004
260
1
17
Aug 1, 2004
#2
  • Aug 1, 2004
  • #2
Is the engine well grounded, block to chassis?
 
G

gopher_6_9

Member
Jun 16, 2003
55
0
6
Aug 2, 2004
#3
  • Aug 2, 2004
  • #3
Ourobos said:
Is the engine well grounded, block to chassis?
Click to expand...


Hmmmm, you know I honestly don't know how well it is grounded, Thanks that is one more thing to check that I really hadn't thought about.
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Aug 2, 2004
#4
  • Aug 2, 2004
  • #4
i would guess on timing.
 

Killer50stang

New Member
May 11, 2004
632
0
0
Aug 2, 2004
#5
  • Aug 2, 2004
  • #5
dastang2 said:
i would guess on timing.
Click to expand...

Agreed. If you missing most likely your timing is off. What is your timing set to now? Try setting it around 8* and see how it runs there. If your distrubtor has no advance, you'll want to set it between 26-30* for locked timing. What kind of distribtor do you have? Stock? MSD?
 
G

gopher_6_9

Member
Jun 16, 2003
55
0
6
Aug 3, 2004
#6
  • Aug 3, 2004
  • #6
MSD distributer with mechanical advance.... timing is set at 10 degrees right now, has been anywhere from 6* to 22* trying to fix this and it is always present............
 
B

bt15

Member
Sep 3, 2003
129
0
17
Oahu
Aug 3, 2004
#7
  • Aug 3, 2004
  • #7
I recently experienced the same problem with my 1985 Mustang. The culprit turned out to be the coil. If you bypass your ignition box and use your distributor signal to trigger your coil directly, and the problem persists (but will be even worse across the entire rpm spectrum), then it's the coil. If it goes away on a direct wire to the coil, it's your ignition box. If you still have an ignition system (other than the MSD) lying around, hook it up and see if it works. It worked for me. Good luck!
 

Killer50stang

New Member
May 11, 2004
632
0
0
Aug 3, 2004
#8
  • Aug 3, 2004
  • #8
gopher_6_9 said:
MSD distributer with mechanical advance.... timing is set at 10 degrees right now, has been anywhere from 6* to 22* trying to fix this and it is always present............
Click to expand...

I know what you mean. I had the same problem until I got my on the dyno for a tune. It only cost me $80 for the dyno, air/fuel ratio adjustment, and timing adjustment. You might want to do that anyway just so you know you are runng at full go, plus you will know what kind of HP you are pushing. I hit 390 at the wheels on a mustang Dyno. Sneaky Pete is on his way for a little more boost! Anyway, good luck man!
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Aug 3, 2004
#9
  • Aug 3, 2004
  • #9
i hear that msd dizzies burn out pretty easily
 
G

gopher_6_9

Member
Jun 16, 2003
55
0
6
Aug 3, 2004
#10
  • Aug 3, 2004
  • #10
Hmmmm, you guys really have me wondering if it isn't ignition related now... hmm I may have to stick the points distributer back on it now.....

As far as the dyno tune, it is in the future....... unfortunatly the only place I trust around here is an hour and a half away and it won't make ti that far yet..... but yeah it needs it.

Killer50 if you haven't already order the sneaky pete don't it isn't worth it go ahead and get a real kit (trust me the bottle is hooked up behind the seat and as soon aaas I can get it tuned ).
 
You must log in or register to reply here.

Similar threads

F
carb vs cam help needed
  • forango
  • May 2, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 22, 2025
forango
F
98 GT PI Swapped Engine Fires, Dies Immediately NOT PATS
  • MMccPerformance
  • Dec 2, 2023
  • SN95 4.6L Mustang Tech
Replies
3
Views
2K
SN95 4.6L Mustang Tech Dec 20, 2023
Yel2002GTAuto
Y
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Progress Thread Dirty Water Racing 89 Notch Project
  • ShedBuiltMS
  • Sep 29, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
64
Views
13K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2021
Flyboy60
F
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?