• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

k member problem

  • Thread starter Thread starter Djstorm100
  • Start date Start date Jan 19, 2008
D

Djstorm100

Member
Aug 5, 2007
109
0
16
Jan 19, 2008
#1
  • Jan 19, 2008
  • #1
--------------------------------------------------------------------------------

I'm restoring my mustang as is. My plan was going to reuse the stock K-member and re-paint the a-arms and Kmember. When I took it all apart I notice the tabs for the a-arm bolts were bent and out of shape. Well considering my a-arms too were bent. Any who

I then made up my mind to get K-member, Aarms, Coilover kit.

I konw I'm going to get the UPR coilover kit.

As far as K-member/A-arms I've readed many post and still lefted in the middle.

I'm between PA, UPR. I know QA1 is crap and AJE you have to use thier motor mounts.

the brand K-member I go with is the brand A-arms I'll go with as well.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Jan 19, 2008
#2
  • Jan 19, 2008
  • #2
Upr is crap too.

What's the budget? Griggs and MM are the best, but they are far from the cheapest.
 
P

PJC Racing

New Member
Nov 21, 2007
199
0
0
Jan 20, 2008
#3
  • Jan 20, 2008
  • #3
Team Z Motorsprorts has excellent package deals and far are more superior in fabrication and customer service.

http://www.teamzmotorsports.net
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 20, 2008
#4
  • Jan 20, 2008
  • #4
I have yet to have a problem with the new UPR kits
 
K

KGOFF

New Member
Nov 25, 2007
63
0
0
nj
Jan 20, 2008
#5
  • Jan 20, 2008
  • #5
QA1 is not crap.Just because it's priced cheaper than most does not mean its junk. I have yet to run into a problem and I have used their entire set up in 3 cars. I currently have a 10sec (on a good day..loll) and was used in an 11 and 12sec street cars as a daily driver (in NYC).I have ordered one for the project I’m working on now. I would love to see one that has failed if anyone can put up a pic.Im a structure engineer for a large firm in NYC and believe this product can with stand more than its given credit for.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Jan 20, 2008
#6
  • Jan 20, 2008
  • #6
ET with a k member means nothing for quality. I mean unless you are crash landing the nose after a 6 ft wheelstand, it has little to do with anything.

It's whether or not it can deal with bumps and potholes without the welds breaking.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jan 20, 2008
#7
  • Jan 20, 2008
  • #7
I have heard from many that their UPR was good. I have also heard few say that it is crap, so I am on the fence with them, and I am sticking with my stock stuff.

MM is the best, but that is high priced stuff....and look at EVERY car in their ads in 5.0 mag. They are frickin full blown road race cars!!!! I'm sure you don't need their high priced high quality stuff for the street.
 
K

KGOFF

New Member
Nov 25, 2007
63
0
0
nj
Jan 20, 2008
#8
  • Jan 20, 2008
  • #8
Not questioning time's.....Like I said it was on 2 cars that went in and out of NYC (the pot hole capital of the world) 5 days a week with no problems. Just because you pay top dollar for parts does not mean they will be better than the cheaper ones. Once again I would love to see a QA1 broken at the welds from daily driving. I have heard everyone knocking Qa1 products but never saw any proof of their inferior quality.Im not saying mm or any is bad,but why buy a jet engine for a moped?
 
K

KGOFF

New Member
Nov 25, 2007
63
0
0
nj
Jan 20, 2008
#9
  • Jan 20, 2008
  • #9
ET's do matter...What keeps that engine from ripping out of the car when you nail the gas to the floor?K-member is mostly an engine support.If your running a full blown race car i would then question the frame.Your strut towers,ball joints and a-arms handles most of the bumps you may aquire.torque from the engine is what matter to the k-frame not so much bumps.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Jan 20, 2008
#10
  • Jan 20, 2008
  • #10
I've seen posts in the past where k-member kits have fallen apart on the street. I can't for the life of me remember which kits these were though. I just think with k-members and a-arms it's important to have a good quality kit because your life depends on it.

Daily driving a car is a lot more intense on these parts
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 20, 2008
#11
  • Jan 20, 2008
  • #11
From what I have heard UPR had some trouble in the past but things were gone through and fixed, I have a couple myself and had yet to have any trouble with em.
 
K

KGOFF

New Member
Nov 25, 2007
63
0
0
nj
Jan 20, 2008
#12
  • Jan 20, 2008
  • #12
Alot has to due with alignment also,guys just pop the k-frame in and think it time to rip up the road.It is of such importance to square the frame,but anyway it's been beat to death......Thank guys
 
D

Djstorm100

Member
Aug 5, 2007
109
0
16
Jan 21, 2008
#13
  • Jan 21, 2008
  • #13
how do you square it?
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jan 21, 2008
#14
  • Jan 21, 2008
  • #14
I take mine to a friend with a frame machine and he aligns th ewhole front end for me using the factory specs
 

millhouse

Founding Member
May 14, 2002
1,985
0
46
Simpsonville, SC
Jan 21, 2008
#15
  • Jan 21, 2008
  • #15
Djstorm100 said:
and AJE you have to use thier motor mounts.
Click to expand...

Says who? Unless they have recently changed something, AJE allow you to use the stock motor mount setup.
 
You must log in or register to reply here.

Similar threads

Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
985
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
R
New Member from Poland
  • Restomotive
  • Apr 22, 2026
  • The Welcome Wagon
Replies
3
Views
185
The Welcome Wagon Apr 22, 2026
91AOD5.0LX
A
SN95 Multifunction Madness! Need some big brain assistance from you folks
  • Awnaw
  • Oct 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
138
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 10, 2026
AeroCoupe
Ball Joints Question
  • 93gtmustang
  • Aug 28, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
606
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2025
AeroCoupe
D
Resolved Vortech hitting hood
  • Dchichizola
  • May 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 18, 2025
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?