• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

kooks headers

  • Thread starter Thread starter imblown-ru
  • Start date Start date Dec 20, 2005

imblown-ru

New Member
Dec 6, 2005
247
0
0
Roanoke VA
Dec 20, 2005
#1
  • Dec 20, 2005
  • #1
I am looking into buying some Kooks longtube headers for the mustang, but there are like 5 different sizes and im not sure which ones i need to get...

1 5/8" x 2 1/2"
1 5/8" x 1 3/4" x 3"
1 3/4" x 3"
1 3/4" x 1 7/8" x 3"
1 3/4" x 1 7/8" x 3 1/2"

too many numbers! what do these mean, and which ones do i need for my car equipped with mods in sig. thanks alot!
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Dec 20, 2005
#2
  • Dec 20, 2005
  • #2
go to their web-site. they have forums. tell them what you want out of your car (DD, Street/Strip, Full Strip) and they will hook you up.

the sizes are primary tube diameters and collector tube diameters i believe.

Great Choice on Kooks (although they dont come ceramic coated ) they are expensive as hell but man are they nice
 

jasonh_86

I
May 20, 2005
1,156
2
48
Arkansas
Dec 20, 2005
#3
  • Dec 20, 2005
  • #3
helty said:
go to their web-site. they have forums. tell them what you want out of your car (DD, Street/Strip, Full Strip) and they will hook you up.

the sizes are primary tube diameters and collector tube diameters i believe.

Great Choice on Kooks (although they dont come ceramic coated ) they are expensive as hell but man are they nice
Click to expand...


^^ Pathological Liar.. :Zip2:



















J/K ... +1 for Kooks!
 

imblown-ru

New Member
Dec 6, 2005
247
0
0
Roanoke VA
Dec 20, 2005
#4
  • Dec 20, 2005
  • #4
ok i will jump on their forums...is anyone on here running them? My sponser pays for 55% of the cost sooo they are less expensive then what most people pay for a regular set of lts. thanks guys
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Dec 20, 2005
#5
  • Dec 20, 2005
  • #5
imblown-ru said:
ok i will jump on their forums...is anyone on here running them? My sponser pays for 55% of the cost sooo they are less expensive then what most people pay for a regular set of lts. thanks guys
Click to expand...
any chance you're sponsor would believe you need to buy "2" sets of LT's?

not many guys around here run them bc of the cost. they'd much rather spend $500 on a set of BBK's and spend the other $300+ on something else, which makes sense for most of us on a limited budget. but if you got the money then by all means, Kooks makes the best headers around IMO. plus you dont need to remove them to change the clutch on our cars.
 

imblown-ru

New Member
Dec 6, 2005
247
0
0
Roanoke VA
Dec 20, 2005
#6
  • Dec 20, 2005
  • #6
i will read my contract and see what i can get around haha. I just made a video for a guy with a s/c z06 and he had kooks headers and borla cat back and it sounded soooooo siickkk so i want them now. thanks
 

mrvax

Stay thirsty my friends
Founding Member
Nov 29, 1999
5,225
3
79
SN Moderator: Orlando, Fl.
Dec 20, 2005
#7
  • Dec 20, 2005
  • #7
helty said:
Great Choice on Kooks (although they dont come ceramic coated ) they are expensive as hell but man are they nice
Click to expand...

I have heard that Kooks headers do not require removal if you need to yank your tranny. Other than that, why do you say they are nice?
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Dec 20, 2005
#8
  • Dec 20, 2005
  • #8
Suppedly you have to use their midpipe. That not removing the tranny thing comes with a cost. You might as well go with a full tubular K and coilovers while your there. Also may want to change the clutch too if you havnt already.
Do you have to have a big sticker on your car that says their name?
 

imblown-ru

New Member
Dec 6, 2005
247
0
0
Roanoke VA
Dec 20, 2005
#9
  • Dec 20, 2005
  • #9
i have 2 1x7'' stickers, but im not sponsored by kooks
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Dec 20, 2005
#10
  • Dec 20, 2005
  • #10
mrvax said:
I have heard that Kooks headers do not require removal if you need to yank your tranny. Other than that, why do you say they are nice?
Click to expand...
i got to fondle a set off of a Camaro last year. the quality of the welds, craftsmanship and overall fit and finish was obvious even to me. i mean what else do you want to know, they were just very high quality headers, hence the high cost. i cant spit out any dyno #'s because i dont know how they compare to others. if you're just building a bolt-on street/strip stang, then you could go with a more cost effecient brand such as BBK and be fine. but if you're building a performance minded track/strip car, then i can see why lot of racers ante up the extra dough.

and no, you do not need to remove them to change the clutch or remove the tranny.
 

imblown-ru

New Member
Dec 6, 2005
247
0
0
Roanoke VA
Dec 20, 2005
#11
  • Dec 20, 2005
  • #11


they are some good looking headers
 

Attachments

  • DSCN0253.webp
    18.1 KB · Views: 135

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Dec 20, 2005
#12
  • Dec 20, 2005
  • #12
 

imblown-ru

New Member
Dec 6, 2005
247
0
0
Roanoke VA
Dec 20, 2005
#13
  • Dec 20, 2005
  • #13
if you read the message board at kooks, the owner is saying baselines have shown the headers to pick up 20-25 hp on a n/a gt
 

KronicRacer

Member
Jun 23, 2004
502
1
18
puttering around Ft Lauderdale, FL
Dec 23, 2005
#14
  • Dec 23, 2005
  • #14
Kook's.......
 

'13_ImpactBlue_GT

Angry Little Elf
Mar 30, 2005
872
2
98
Where the men are men and the sheep are nervous
Dec 23, 2005
#15
  • Dec 23, 2005
  • #15
imblown-ru said:
if you read the message board at kooks, the owner is saying baselines have shown the headers to pick up 20-25 hp on a n/a gt
Click to expand...

How much are they again?
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Dec 23, 2005
#16
  • Dec 23, 2005
  • #16
Toms_2003_Stang said:
How much are they again?
Click to expand...
$800+. if i had the money and a sponsor paying 55%, i'd buy them too.
 

mrvax

Stay thirsty my friends
Founding Member
Nov 29, 1999
5,225
3
79
SN Moderator: Orlando, Fl.
Dec 23, 2005
#17
  • Dec 23, 2005
  • #17
helty said:
$800+. if i had the money and a sponsor paying 55%, i'd buy them too.
Click to expand...

$800???? Fergetaboutit. For that price they should be made of platinum.
 

helty

some Ukrainian's enjoying a handjob via my credit
Mar 30, 2005
1,461
1
39
Baltimore, MD
Dec 23, 2005
#18
  • Dec 23, 2005
  • #18
mrvax said:
$800???? Fergetaboutit. For that price they should be made of platinum.
Click to expand...
they are top of the line. you get what you pay for. for most of us, a set of BBK's for $500 will be just fine on our daily driven street/strip stangs. but for a race car, (especially if you have a sponsor willing to pay over half the cost) Kooks are the way i'd go.
 
You must log in or register to reply here.

Similar threads

C
Need MIL Eliminators?
  • crazyone64
  • May 18, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
304
SN95 4.6L Mustang Tech May 21, 2026
GOvert
G
K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
386
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
4
1965 mustang 351 850 hp+ primary tubes 1 7/8 or larger and a 3 inch or larger collectors?
  • 427nostang
  • Jun 4, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2
Replies
29
Views
885
1965 - 1973 Classic Mustangs -General/Talk- Aug 7, 2026
DadLife0724
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
159
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
585
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?