Late model OEM 6 CD in a Fox

TTT, also curious as to fit/mods needed to do this possible swap

TTT, I too am curious.

well i have done this it is VERY time consuming.
You need to find what car your pulling the late model unit out of well say 02 explorer b/c it is what i have done.

I baught a wire harness for the explorer and hooked it up, thats how i knew what wires were what so i marked them on both sides, b/c i didn't know they made an aftermarket harness that would plug into the h/u (i think they make one now), so i chopped the factory harness out to use it in the other car.

So once you know what each wire is its a simple switch,buy a wire harness for your fox and plug and play. you have to make a custom din reducer/holder,there is not much reducing, it worked well, for a stock sounding radio.

still would be crappy with amps b/c no RCA out put unless you use a line converter which is B/S.

ill see if i can find some pics, but it was not hard and looked pretty good.

Pics?