Left side and Right side.
- Thread starter Blueinfan
- Start date
L and R is as your rear is in the driver’s seat, looking forward, sitting in proper driving position. Passenger=R, Driver=L in US cars.
Make sure the bleeder is on the top side of the caliper. This let's the air out properly.
Any idea where I can purchase the bleeders for the back calipes? I'm upgrade my 4 lugs 5 lug using SN95 spindles and 99 GT calipers.
FLAPS = Friendly Local Auto Parts Store.
I would start at a Jobber store (one that also serves pros) like NAPA first for bleeders. The new, untrained help at a chain store might think a bleeder requires first aid. ;-)
I just bought new ones for my upgrade at Auto Zone.
There’s a few different thread pitches, so make sure you get the right one...... or buy the variety pack, and find the ones that fit.
There’s a few different thread pitches, so make sure you get the right one...... or buy the variety pack, and find the ones that fit.
WhiteCobra95
10 Year Member
- May 2, 2006
- 638
- 179
- 74
The same goes for the caliper banjo bolts for the brake hoses. If you're doing Cobra calipers, they changed from fine to course thread somewhere between '98 and '00 if I remember correctly. The calipers themselves also changed, from symmetric piston diameters to one big and one small, but I don't know if that alone indicates the different brake hose bolt.
