• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Lifters tap on cold start.

  • Thread starter Thread starter Quik03GT
  • Start date Start date Jan 14, 2009
Q

Quik03GT

Member
Mar 2, 2006
88
0
6
Jan 14, 2009
#1
  • Jan 14, 2009
  • #1
Hey guys, it's been very cold here lately and my lifters have been tapping like crazy when I start it in the morning. It wouldn't bother me if they tapped for a few seconds then stopped, but it takes like 4 or 5 minutes of driving before they finally quiet down. Is there anything I could do short of replacing the lifters that might help this?


Thanks!
 

Boostedpimp

20+ Year Stangneter
May 8, 2003
1,451
493
154
NJ
Jan 14, 2009
#2
  • Jan 14, 2009
  • #2
Mine does it as well but only for about two minutes.. it's low 30's to mid 20's here this week so I wonder if there is anything that can be done for this but im thinking there isn't
 
T

Touring23

Founding Member
Dec 29, 2001
294
0
0
Washington
Jan 14, 2009
#3
  • Jan 14, 2009
  • #3
Electric plug-in block heater.
Switch to 5W-xx oil...?
 

Saleen8786

New Member
Oct 7, 2003
209
0
0
Marlton, NJ
Jan 14, 2009
#4
  • Jan 14, 2009
  • #4
i had a similar problem in the cold start ups and after beating on my gt for like 10mins,it would tap till i took it easy for alittle bit,i switched to a thicker oil its called rotella,wal mart sells it. I think its 5w 30 or somethin,but ever since that no tap or nothing.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 14, 2009
#5
  • Jan 14, 2009
  • #5
Saleen8786 said:
i had a similar problem in the cold start ups and after beating on my gt for like 10mins,it would tap till i took it easy for alittle bit,i switched to a thicker oil its called rotella,wal mart sells it. I think its 5w 30 or somethin,but ever since that no tap or nothing.
Click to expand...

You better make sure you didnt get the 20w-50 rotella made for diesels......As far as I knew, that was the only oil rotella made
 
You must log in or register to reply here.

Similar threads

D
Rockers, lash adjusters and timing: help with parts (4.6 2v)
  • dvigAtel
  • Nov 1, 2025
  • Other Auto Tech
Replies
0
Views
254
Other Auto Tech Nov 1, 2025
dvigAtel
D
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
735
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
M
warmed up, hard re-starting on hot days
  • michaelleewebb
  • Mar 26, 2026
  • SN95 V6 Mustang Tech
Replies
9
Views
304
SN95 V6 Mustang Tech Mar 29, 2026
michaelleewebb
M
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
882
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?