Longer Axles???

The Fox

New Member

Mar 30, 2005

354

0

0

Port Elizabeth

Mar 21, 2006

#1

• Mar 21, 2006

• #1

Ok my plan was to pickup a detroit locker from ebay and get superior 31 spline axle kit from summit and then grab an 8.8 from my buddy's junk Mark VII.

Problem is some people here on stangnet say they are 3/4" longer on each side for a total 1.5". If I were to buy these axles would there be a chance that they just wouldn't fit???

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Mar 21, 2006

#2

• Mar 21, 2006

• #2

My recollection is that they're a TOTAL of 3/4" wider from lugnut to lugnut.

Edit:

If all you're after is an 8.8 31 spline, then why not go with a set of Moser of STrange axles that are the stock length?

 

The Fox

New Member

Mar 30, 2005

354

0

0

Port Elizabeth

Mar 21, 2006

#3

• Mar 21, 2006

• #3

The superior axles are the stock length aren't they? It's just the fact that 8.8 housing is wider so I'm worried the the axles won't make it all the way in.

 

The Fox

New Member

Mar 30, 2005

354

0

0

Port Elizabeth

Mar 21, 2006

#4

• Mar 21, 2006

• #4

I'm currently running a 7.5 rear. So getting this Mark VII would be an upgrade, but then it would suck if axles for a Fox 8.8 don't fit.

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Mar 21, 2006

#5

• Mar 21, 2006

• #5

Ahhhh.... I see what you're saying now.

I think you are correct. They won't fit. You need to get axles that are of the 94/95 model year variety in 31 spline. Do not quote me however. Get with Mustang5L5. He seems to have all this sort of thing down cold.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,265

17,952

224

Massachusetts

Mar 22, 2006

#6

• Mar 22, 2006

• #6

The answer to this question all depends on what brake setup do you plan on running with this 8.8 rear end??


The housings are the same size between the Mark 7 and the Mustang. Mounting points for Control arms and quad shocks i'm not 100% on but in terms of mounting axles and such they are the same. Only the 99+ Mustangs have a wider housing.

Compared to stock fox axles, 94-98 SN95 axles are 0.75" wider each side while Mark 7/SVO axles are 1.5" wider EACH side. So if you plan on using Mark disk brakes, you will need axles specified for an SVO or Mark 7 with the 1.5"-longer-than-stock-fox-axle lenght.

Considering i'm working off 4 hours of sleep in the last 48 hours i'll answer this more once i've had a chance to sleep and refresh.

 

The Fox

New Member

Mar 30, 2005

354

0

0

Port Elizabeth

Mar 22, 2006

#7

• Mar 22, 2006

• #7

Im keeping drum brakes. I'll just keep searching for an 8.8 Oh yeah do you NEED c clip eliminators when going to a spool. I would imagine you do but not sure.

 

T

TheUser

Active Member

Jul 25, 2003

1,859

1

36

Springfield, MO

Mar 22, 2006

#8

• Mar 22, 2006

• #8

don't forget to account this extra length into your wheel/tire combo. You'll need more backspacing if you plan to run wide wheels. I'm sure you know this, but just making sure it was brought up.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,265

17,952

224

Massachusetts

Mar 22, 2006

#9

• Mar 22, 2006

• #9

The Fox said:

Im keeping drum brakes.

Click to expand...

Then just get axles for a stock Fox and swap your drum hardware over. Housing width is the same