looking for info on pi heads and blowers

98 pi stang · Jul 11, 2006

i have a 98 mustang gt with pi heads and intake want to put blower on anyone done this before and how has it worked out

Miles · Jul 11, 2006

Your compression is too high to do a blower properly, unless you changed out your pistons while doing the PI headswap - tough to tell when you haven't given us alot of info on your ride.

On that note tho, nitrous loves higher internal compression numbers...

Gearbanger 101 · Jul 11, 2006

Well, seeing as how you're hovering in the 10.4:1 range, you're gonna have to keep boost levels low and pull a lot of timing in order for it to work and stay together. You'll still make great power though. As Miles stated, nitrous is another great option....especially with a higher compression set up like yours.

four six · Jul 11, 2006

no2 FTW!!!!!!!!!!

Pennywise2 · Jul 12, 2006

Nitrous Express 4.6L plate kit.
Nitrous loves compression that's for sure lol.

Built98GT · Jul 12, 2006

Also, It depends on what gaskets you use. I think if you use a thinner gasket it lowers the compression retio a little. If you do put a supercharger on you will want to run low boost due to your stock pistons. I would seriously look into the nitrous.....either NX or the original NOS brand.

stangGT97 · Jul 12, 2006

wouldnt a thicker gasket lower the CR? anyway, like stated you'll have to run low boost but you will make some good #s

Gearbanger 101 · Jul 12, 2006

Built98GT said:
Also, It depends on what gaskets you use. I think if you use a thinner gasket it lowers the compression retio a little.

I think you mean thicker.

looking for info on pi heads and blowers

98 pi stang

New Member

Miles

Gearbanger 101

Straight Outta Locash

four six

Member

Pennywise2

Banned

Built98GT

New Member

stangGT97

New Member

Gearbanger 101

Straight Outta Locash

Similar threads

looking for info on pi heads and blowers

New Member

Straight Outta Locash

Member

Banned

New Member

New Member

Straight Outta Locash

Similar threads

Privacy & Transparency

Privacy & Transparency