Looking to buy a 03/04 cobra soon.

on pump gas 15psi running a "mild" tune...

If your pockets are deep you should be looking for way more than 600rwhp.

pm neoclassicl, he is selling his with a KB blower

A friend of mine and myself will be looking to either buy an 04' Cobra or C6 in the near future. I need a V8. I still miss my 02' Cam'd SS .

What power are you making at 27 psi and an 80 shot? If it is over 500 rwhp you should be well into the 10's assuming the Talon weighs a lot less than an 03/04 Cobra.

I make 503 rwhp SAE and 550 rwt on the stock Eaton with a 2.80 upper and a four pound lower, full exhaust with JBA's and 3.90 gears. My last pass was in the middle of a 100 degree day with a full tank of pump gas and it went 11.39@122. It should go 10's on a cool night.

A buddy of mine is similar in mods with LT's and a six pound lower. I do all his mods and I installed a dry kit on it a few days ago. He got his chip tuned for a street and a spray program. On the street program with no juice the car made 510 rwhp SAE and 570 rwt with a stock Eaton. Then we made a pull on the spray program without spray to check the A/F. It made 503 rwhp and torque was around 560. Then we hit it with a dry shot through a .046 jet just ahead of the TB. It made 570 rwhp SAE and 670 rwt. All pulls were made back to back. The .046 shot leaned it out about a half point. Plugs were gapped at .023 and are Densos. Before the spary, it ran 7.20 at Mooresville with a slipping clutch in the middle of a warm day. It also has a live axle.