looking to do a budget engine build

Gearbanger 101 · Dec 14, 2011

NikwoaC said:
I've been helping my neighbor do an Explorer swap, and while it's not terribly complicated, it's not exactly an overnight operation, either. Especially considering that no one in their right mind would run the stock Explorer cam, there is a fair amount of work involved. It may be cheaper to do an Explorer engine, but there is just as much, if not more, work involved with an Explorer swap than there is doing an HCI on a stock Mustang shortblock.

I don't know if I would 100% agree with that. True, a H/C/I swap can be performed on your stock engine in the vehicle, sure....but it's a whole lot easier to perform whatever tasks you want to do to the engine while it’s out of the car, bolted to an engine stand.

Another nice thing is that you don't need to remove the heads on the Explorer engine in order to do a cam swap. That's a bit of a cost and time savings right there.

I paid $300 for the low mileage Explorer engine I have sitting on my stand. It came complete minus throttle body and accessories. I can work on it, polish, clean, paint it at my leisure, dress it any way I want, everything is easy to get to and easy to see and the only down time my Mustang experiences is the time it takes me to pull the old engine out of my car and drop the new engine in. Considering how easily and quickly these engines can be removed and replaced...are you really saving any time or effort trying to do back breaking engine bay acrobatics performing a H/C/I swap with the engine still in the car? Not to mention having the engine out gives you plenty of opportunity to repair and rust, or damage located in the engine bay, of if one were inclined...to fill holes and hide wires without trying to maneuver around an engine block.

NIKwoaC · Dec 14, 2011

I mean, I can see the benefits of building an engine on a stand for sure. But the thing is, an Explorer engine isn't the "easy button" that people make it out to be. I mean, I don't think I have to explain to anybody on here how much more work is involved in reconditioning used parts. That's just a given. Even ASSUMING you don't run into any hiccups (like, the old rusty spark plug that broke off in my buddy's Explorer cylinder head), you've still gotta do stuff like swap out valve springs and set installed heights, which is stuff that is typically already done for you with brand new heads.

An Explorer engine can definitely be budget friendly, but it's really just as much work as anything else.

ID89GT · Dec 15, 2011

I agree with the explorer motor. I just picked one up complete intake to oil pan for 140 plus tax. Came with the injectors and all. Tear it apart and go through it, all new gaskets, new cam and the valve spring upgrade kit and I have a decent motor for less than 1k easy

looking to do a budget engine build

Gearbanger 101

Straight Outta Locash

NIKwoaC

中國製造

ID89GT

Similar threads

looking to do a budget engine build

Gearbanger 101

Straight Outta Locash

NIKwoaC

中國製造

ID89GT

Similar threads

Privacy & Transparency

Privacy & Transparency