lots of trouble codes

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

Jan 22, 2006

#1

• Jan 22, 2006

• #1

my car is pulling a lot of different codes
5284 Oil Pressure Switch Failure
9318 Battery voltage low
D262 Missing SCP message.
D043 SCP Invalid or missing data for Traction Control
D147 SCP Invalid or missing data for vehicle security

new oil pressure switch and new optima battery installed less than a month ago. anyone know whats going on?

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Jan 22, 2006

#2

• Jan 22, 2006

• #2

Is your CEL on? That sounds like HEC diagnostics, which mean basically jack squat unless you have a CEL, or a OBD-2 code stored. Almost every person I've ever heard about who ran the HEC diagnostics got the oil pressure code.

 

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

Jan 23, 2006

#3

• Jan 23, 2006

• #3

yea its hec and no CEL

 

O

OleYellarGT

New Member

Jul 9, 2004

64

0

0

Charlotte, NC

Jan 23, 2006

#4

• Jan 23, 2006

• #4

I 2nd that...If you pull HEC codes it will always show 5284, but if you watch the voltage you will see that the switch is working....as far as the traction control, do you have a tune that turns it off? If so, that is the reason for those codes.

 

mity2

I like Pro3 and all I got was this crappy CT.

Jul 24, 2003

2,872

3

48

StateCollege PA

Jan 23, 2006

#5

• Jan 23, 2006

• #5

what is HEC code?!?!

 

O

OleYellarGT

New Member

Jul 9, 2004

64

0

0

Charlotte, NC

Jan 24, 2006

#6

• Jan 24, 2006

• #6

Hec codes you pull using the odometer of your car check it here http://www.mustangworld.com/ourpics/fcar/dtcodes.htm

 

98blackmagic

New Member

Jun 2, 2005

386

0

0

wouldnt you like to know

Jan 24, 2006

#7

• Jan 24, 2006

• #7

I have a question, what codes on the OBD II test would cause you to fail a emissions test? N.C. new testing not Calli

 

O

OleYellarGT

New Member

Jul 9, 2004

64

0

0

Charlotte, NC

Jan 24, 2006

#8

• Jan 24, 2006

• #8

do you have the printout from the test? It could be as simple as the computer having been reset and not enough drive cycle.

 

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

Jan 24, 2006

#9

• Jan 24, 2006

• #9

no print out. i just pulled the codes from the instrument cluster

 

O

OleYellarGT

New Member

Jul 9, 2004

64

0

0

Charlotte, NC

Jan 24, 2006

#10

• Jan 24, 2006

• #10

sorry bout that saleengt, the last post was directed at 98blackmagic....are you still having codes saleengt?

 

SaleenGT2001

Well-Known Member

Jul 18, 2005

2,811

4

58

Four Oaks NC

Jan 24, 2006

#11

• Jan 24, 2006

• #11

as far a NC inspections go. unless your check engine light is on your good in most countys. some use the exhaust test other counties (like mine) just go by the CEL.