loud rockers,any ideas?

blckstng96 · May 17, 2008

i just got done putting my car back together last night with a new used motor and everything was good except it had a little miss and the rockers on the driver side are pretty loud.any ideas? oil pressure is in the middle of normal.

Fast63 · May 17, 2008

did you make sure to check your pushrod length was good and are you sure you followed the proper procedures for setting the rockers?

wait, is this in your 96 or your 88? Little more information would be nice

SMOKEDYA · May 18, 2008

assuming your talking about you 5.0? some rockers are noisey, mine are and there shimed properly tourques properly proper rods everything is correct and well there noisey. peace

john

Killer50stang · May 18, 2008

SMOKEDYA said:
assuming your talking about you 5.0? some rockers are noisey, mine are and there shimed properly tourques properly proper rods everything is correct and well there noisey. peace

john

I had 1.6's and they were never loud. Loud = loose. check your specs and make sure you torqued properly. I am assuming you replaced the rods as well...if not, you need to.

blckstng96 · May 19, 2008

the heads were not off the motor,i put a used longblock in.the motor was in a friends car and he didnt have any problems then it sat for prob a year or two then i got it.only thing done to the heads was tightened down the rockers and thats it.

blckstng96 · May 19, 2008

oh and yes this is on my 88

loud rockers,any ideas?

blckstng96

Member

Fast63

New Member

SMOKEDYA

Killer50stang

New Member

blckstng96

Member

blckstng96

Member

Similar threads

loud rockers,any ideas?

blckstng96

Member

Fast63

New Member

SMOKEDYA

Killer50stang

New Member

blckstng96

Member

blckstng96

Member

Similar threads

Privacy & Transparency

Privacy & Transparency