• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Low Oil Pressure?

  • Thread starter Thread starter GT_Rich
  • Start date Start date Apr 5, 2006

GT_Rich

Member
Dec 11, 2005
172
0
17
North Canton, OH
Apr 5, 2006
#1
  • Apr 5, 2006
  • #1
I just started driving this car, so bear with my lack of knowledge. Where does everyone's stock oil pressure gauge read at idle and at say 3k rpm? Is the gauge in our cars (92, specifically) a dummy gauge, or an actual gauge that will read a variey of pressures. I know in my old Supercouple, it was just an on/off gauge.

I ask b/c I noticed today I'm reading only one to two clicks above the "L". Are sending units common problems with the 5.0's? Or do I have a bigger problem on my hands. Motor was rebuilt (supposedly) 30k miles ago and has a B-cam. Other than that, stock and uses no oil.

Thanks,
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Apr 5, 2006
#2
  • Apr 5, 2006
  • #2
Stock gauge can not be trusted to give an accurate reading of Oil PSI. Everyone here will tell you to get an aftermarket gauge to verify your pressures.

You'd like to see 30PSI @ 2000 RPM with warm oil
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Apr 5, 2006
#3
  • Apr 5, 2006
  • #3
srothfuss said:
Stock gauge can not be trusted to give an accurate reading of Oil PSI. Everyone here will tell you to get an aftermarket gauge to verify your pressures.

You'd like to see 30PSI @ 2000 RPM with warm oil
Click to expand...
right on!!!!!!
 

the98stang

Active Member
Aug 12, 2005
2,408
0
47
Clovis, CA
Apr 5, 2006
#4
  • Apr 5, 2006
  • #4
Like others said, the stock oil pressure gauge is a joke. Get an Autometer gauge that shows actual psi .
 

GT_Rich

Member
Dec 11, 2005
172
0
17
North Canton, OH
Apr 5, 2006
#5
  • Apr 5, 2006
  • #5
Thanks for the replies...

Is there a write-up any where for installing electric autometer gauges for oil PSI and water temp? I was actually thinking about doing the 2-pod a-pillar gauges anyways. Will the autometer gauge use the stock sending unit? Where will it tap into at? Same with the water temp?

Thanks again,
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Apr 5, 2006
#6
  • Apr 5, 2006
  • #6
The autometer gauge will coem with it's on sending unit. You either replace your stock sender with the auotmeter or run a Tee fitting and keep both functioning. Wiring is really simple you have th ewire from the sender tot he gauge. A power wire for the gauge that can hook to a fuse such as for the blower motor. A power wire for the light in the gauge that works really well hooked to the fuse for the dimmer switch (so that the lights dim with the panel lights) and then just a ground for the gauge and a ground for the gauges light.


Oh and like everyone else said don't pay much attention to the stock gauge.
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Apr 5, 2006
#7
  • Apr 5, 2006
  • #7
You can search my user name and the word "Gauges" and it'll come up with a write up.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Apr 5, 2006
#8
  • Apr 5, 2006
  • #8
I ran my autometer gauge off the stock sending wire. I didn't have to run a wire through the firewall, just had to find the wire behind the gauge console.

jason
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
734
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
D
Engine Question about oil pressure gauge
  • dqureshi06
  • Dec 30, 2024
  • Fox 5.0 Mustang Tech
Replies
7
Views
519
Fox 5.0 Mustang Tech Dec 31, 2024
General karthief
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
741
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
P
Weird Voltage & Oil Pressure Gauges
  • PNN
  • May 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
166
SN95 V6 Mustang Tech May 22, 2026
PNN
P
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?