lower control arms

[ilbehaved]

be honest those who have them. did they help your car with traction drag racing? i dont care about corners or anything else. thanx

 

[94GTStang]

They helped out alot in all my past experiences. The only down side is that some make the car alot louder in the back due to the harder bushing in the aftermarket LCA.

 

[1low03gt]

They will help,you would not be disappointed.
As for a brand,there lots of good quality pieces out there to choose from.

 

[94GTStang]

I have the Saleen ones on the 94GT and love those a lot. I don't think they make any bad noises or what not. I had some Mac ones on my old car and those were noisey as all get out.

I've also heard the Maximum motorsports are noisey too.

 

[san~man]

You can get a dual poly bushing LCA if you only care about going straight. That should give you some good 1/4 mile traction, but beware of bind in the turns.

 

[BennyBlown2v]

You can get a dual poly bushing LCA if you only care about going straight. That should give you some good 1/4 mile traction, but beware of bind in the turns.

Yeah...bind in the turns causing wheel hop and damage to the torque boxes...no thanks

Maximum Motorsports has all the control arms you could possibly need. Quality is unbeatable.

 

[ilbehaved]

i have lower springs on my car. how hard is it to switch the lower control arms and is there anything that might catch me by surprise during the install?

 

[jasonh_86]

The LCA install is very straight-forward

I accomplished it by myself at night with 2 jackstands and hand wrenches in about 2 hours, taking my time.

The MM LCA's are the best, imo. I've got the ones with poly and spherical bushings and I love them!!

They made a good difference in my launch, 1-2 and 2-3 shift traction

 

[mity2]

LCA has been in my "to do" list since day one.


When i replaced LCA on T/A, i did not really notice anyting, however