• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Lower intake install ?

  • Thread starter Thread starter BYRDPE
  • Start date Start date Jul 19, 2007
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Jul 19, 2007
#1
  • Jul 19, 2007
  • #1
In a few days I will be installing ported GT40 heads and intake along with a cam.
1. What I need to know is what parts can I install on the lower prior to installing it on the heads?
2. Do I use any sealant on the lower intake gaskets and if so what areas?

Thanks
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Jul 19, 2007
#2
  • Jul 19, 2007
  • #2
I generally leave everything off the lower. Bolt it on an then install the fuel rails, heater hard line and other sensors. You can bolt the t stat housing on the lower before installing it. I don't think that it would get in the way when you put it on.

As far as sealant, I use some around each of the water jacket openings and instead of the cork end gaskets I use a thick bead of black RTV at each end of the intake.
 
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Jul 19, 2007
#3
  • Jul 19, 2007
  • #3
Cool....
Thanks
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Jul 20, 2007
#4
  • Jul 20, 2007
  • #4
Make sure you follow the torque pattern for the intake and torque to spec. After you torque to spec you will most likely have to go back throught the bolts again in the same pattern till you get them all torqued. If you only do it once, you will find the bolts are way below the torque spec.
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
518
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
Engine Catch Can or not?
  • R82148V
  • Mar 4, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
498
Fox 5.0 Mustang Tech Mar 6, 2026
ctandc
C
Resolved 1999 cobra removed lower intake manifold to crossovertube
  • hvcobra99
  • Sep 6, 2026
  • SVT Tech Forum
Replies
0
Views
167
SVT Tech Forum Sep 6, 2026
hvcobra99
Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
739
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?