• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Lower intake o-rings question

  • Thread starter Thread starter mustang88
  • Start date Start date Oct 13, 2005
M

mustang88

New Member
Nov 2, 2004
69
0
0
Oct 13, 2005
#1
  • Oct 13, 2005
  • #1
lower intake from a 96 explorer ,it has o rings where the injectors go ,some of the orings are missing. can i buy orings from a website? if there is whats the address?

or are the orings from the injectors and stayed in while i pulled them? im not an expert on mustangs yet.

how do i install the new orings and , install injectors? tap them in?

the intake isnt ruined right?
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Oct 13, 2005
#2
  • Oct 13, 2005
  • #2
OMG, IT'S DESTROYED! j/k

Those o-rings are off the old injectors. Just pop them out of there, and pop your injectors in. Napa or someplace like that could get you some new o-rings for your injectors if you're worried about them leaking. They should just push into the intake.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Oct 13, 2005
#3
  • Oct 13, 2005
  • #3
Fuel injector seal kits with 2 O rings and a pintle cap (Borg-Warner P/N 274081) are available at Pep Boys auto parts. Cost is about $2.74 per kit.. The following are listed at the Borg-Warner site ( http://www.borg-warner.com ) as being resellers of Borg-Warner parts:

http://www.partsplus.com/ or http://www.autovalue.com/ or http://www.pepboys.com/ or http://www.federatedautoparts.com/

Most of the links above have store locators for find a store in your area.

Use motor oil on the O rings when you re-assemble them & everything will slide into place. The gasoline will wash away any excess oil that gets in the wrong places and it will burn up in the combustion chamber.

The pintle caps fit either injectors with a pin sticking out the injector end or 4 with more tiny holes in the injector end
 
M

mustang88

New Member
Nov 2, 2004
69
0
0
Oct 13, 2005
#4
  • Oct 13, 2005
  • #4
thanks guys
 
You must log in or register to reply here.

Similar threads

Engine Catch Can or not?
  • R82148V
  • Mar 4, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
493
Fox 5.0 Mustang Tech Mar 6, 2026
ctandc
C
Engine Starter ring gear depth. 3/8 or 3/4 inch?
  • 92Rustang
  • Aug 4, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
491
Fox 5.0 Mustang Tech Aug 22, 2025
Rcdgl
R
Engine Explorer - Lower intake internal cleaning
  • R82148V
  • Nov 11, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
42
Views
2K
Fox 5.0 Mustang Tech Dec 6, 2025
rednotch
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
499
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
L
Engine Need help diagnosing 2 dead cylinders
  • lvgnmz
  • Feb 13, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
556
Fox 5.0 Mustang Tech Feb 13, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?