• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Lowering vs. Driveability

  • Thread starter Thread starter ucf11784
  • Start date Start date Sep 21, 2007

ucf11784

New Member
Nov 8, 2006
42
0
0
UCF
Sep 21, 2007
#1
  • Sep 21, 2007
  • #1
Hey guys I have a 2007 GT/CS and I was thinking about lowering. Last time I lowered a car though it made some noise with just springs and I had trouble getting my oil changed at places. I know the CS is already a little bit lower because of the front bumper. I was wondering if anyone has noise problems with springs on the mustang and how hard it is for you guys to get your car serviced (like oil changes and what not). Thanks guys.
 

blacksheep06

New Member
Jan 31, 2006
288
0
0
Sep 21, 2007
#2
  • Sep 21, 2007
  • #2
I have the steeda ultralites which lower the front 1" and the rear 1.25". Drivability isn't an issue for me. I never rub my chin spoiler as long as I'm careful pulling in and out of driveways.

As far as oil changes I go to a place where you just drive over the pit, I've never had it on a lift yet but I'm not worried. I've never rubbed on a speedbump either. As long as you go with a mild drop and be careful it's no problem at all. And my chin spoiler hangs probably as low as your front bumper.

I have no noises at all. I had some major clunking at first but I had the end links tightened and it took care of it. The car rides smooth and quiet as a mouse now.
 

ucf11784

New Member
Nov 8, 2006
42
0
0
UCF
Sep 21, 2007
#3
  • Sep 21, 2007
  • #3
That sounds good. Yeah I go to the places where you pull over the pit but they have a little guard rail up. I used to not be able to my honda in there when I lowered it. I had to drive around back and go in the backside of the pit. Would you recommend asking the place to tighten my end links just to be sure?
 

blacksheep06

New Member
Jan 31, 2006
288
0
0
Sep 21, 2007
#4
  • Sep 21, 2007
  • #4
Wouldn't hurt to ask the installer to make sure the endlinks are tight. It seems to be a common source of noise when you change the suspension but it's easy to fix.

The place I have my oil changed has rails too, still no problem.
 
J

JohnGT06

New Member
Sep 15, 2006
2
0
0
Sep 21, 2007
#5
  • Sep 21, 2007
  • #5
Depending on how big of a drop your looking for, you shouldn't have to much trouble. I have the motorsport springs which dropped it 1.5, looks killer, cant beat the quality either, quick install and didnt really notice any difference in the ride quality to be honest(and even with 20's). As far as clearance, only 1 speed bump my h pipe has just grazed. But puttin it on post type lift you might run into trouble, at the ford dealership I work at, we had to sneak a floor jack under her to get her off the lift posts. So yes you will must likely have to use a drive over style, oil change pit. But hey if you can live with that....then go for it!!! Looks sweet!!!
 

kooldawg6

mine works really well and can take a fair amount
Aug 31, 2006
1,679
2
38
Central VA
Sep 21, 2007
#6
  • Sep 21, 2007
  • #6
JohnGT06 said:
So yes you will must likely have to use a drive over style, oil change pit. But hey if you can live with that....then go for it!!! Looks sweet!!!
Click to expand...

This is why I change my own oil and after I lower my car I will be using some home made ramps as such...
http://forums.stangnet.com/showthread.php?t=720129
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Sep 22, 2007
#7
  • Sep 22, 2007
  • #7
I got the FRPP kit and I love it. The car doesn't bottom out, it comes with a camber eccentric so no need for camber kits and it's lowered to perfect height where a bump steer kit is not needed so you get a COMPLETE handling package without the need for "extras"!!!
 
B

bluecar

Member
Feb 19, 2007
99
0
6
SF CA
Sep 22, 2007
#8
  • Sep 22, 2007
  • #8
H&R springs give a 7/8 inch drop in the rear and 1 inch in front. They are said to affect the ride by about 15%. Mild drop, not very noticeable difference in ride. Mine are fine, although I just lowered the rear. Looks great too since the car's a55 is not sticking way up in the air.

I did FRPP on a 2001 Cobra and my opinion was it as bone jarring and rattled the teeth out of my head. Plus, I felt my car was being rattled to pieces because of the roads in the SF Bay area. It was certainly beautiful because I put 275/40 tires on it with 18x9.5 wheels but the ride royally pi55ed me off.
 
You must log in or register to reply here.

Similar threads

B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
410
Fox 5.0 Mustang Tech May 11, 2026
keel
G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
127
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2026
Qtrhrse23
Q
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
862
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
399
1996 - 2004 SN95 Mustang -General/Talk- Aug 3, 2026
squeak93
Removing speedo cable from the VSS
  • 91AOD5.0LX
  • Mar 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
903
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
91AOD5.0LX
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?