• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

LS1 Swap...

  • Thread starter Thread starter Halfrican
  • Start date Start date Jun 22, 2007
Status
Not open for further replies.
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last

forum155pl

New Member
Jul 11, 2006
520
0
0
the 509
Jun 23, 2007
#21
  • Jun 23, 2007
  • #21
streetstang03 said:
This mustang has an LS1 in it:

Click to expand...

side note.. putting an LS1 motor in your stang will not make your car do this..... unless you put as much money into it as if you stuck with your 2V and built it up.. keep a ford a ford and keep a chevy a chevy...
 

02LaserRed2V

New Member
Jul 30, 2004
379
1
0
Augusta, GA
Jun 23, 2007
#22
  • Jun 23, 2007
  • #22
forum155pl said:
keep a ford a ford and keep a chevy a chevy...
Click to expand...

+1 a-fkn-men!

If you want an LS1 so bad, sell the stang and get a Camaro. You'd save yourself some money and headaches as well.
 

Wolvrin704

Member
Apr 17, 2007
120
0
17
Milford, OH
Jun 23, 2007
#23
  • Jun 23, 2007
  • #23
I think the philosophy at Ford has been to build more effecient motors for cars that have more gentle manners and can be a DD. The Chevy/Pontiac guys just went with faster is better and their philosophy was speed will sell. Well which car was discontinued for several years and which one is still kicking and has been a hot seller with the redesign? Even the GTO didn't last long.
 

blckstng96

Member
Apr 13, 2004
208
0
16
Jun 23, 2007
#24
  • Jun 23, 2007
  • #24
if you want a camaro go buy one,and really if your goin to be paying someone to do all this work i dont understand how the price of things would even make you want to consider doing this,how bout dump 10gs into your existing 4.6,where is the logic in putting an ls1 into a mustang.the only way i can see it being reasonable is if you 1 had a great deal on all the pieces,for example a cheap as hell roller as well as the motor and supposrting parts,2 your a fabricator or engine builder and have all the accesability to make it happen at a reasonable cost or no cost or 3 you were being sponsored to do it.
 
L

Lookin4Stang

New Member
May 23, 2007
1
0
0
Jun 23, 2007
#25
  • Jun 23, 2007
  • #25
I say that if you want an LS1 in your Stang, go for it. I've owned an LT1, an LS1 and am currently seeking out a Stang. I figure you only go around once in life and there is nothing wrong with trying to be different. A lot of LS1 guys gave me a hard time for wanting a Stang but to me its only a car.
 

sicK96GT

New Member
Oct 30, 2006
63
0
0
Austin (College in Waco)
Jun 23, 2007
#26
  • Jun 23, 2007
  • #26
I was thinking about putting my 4.6 engine into a firebird (sunfire?) (firefox? firehawk? firetruck!)....

Then I woke up in a pool of sweat trying to catch my breath.
 

Bad92GT

The 5 Minute Plan Man
Jun 10, 2004
492
0
0
SC
Jun 23, 2007
#27
  • Jun 23, 2007
  • #27
swap in a 351 windsor.. stroked and blown windsor will whipe a camaros ass clean anyday
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jun 23, 2007
#28
  • Jun 23, 2007
  • #28
streetstang03 said:
go for it

and least you will have a great motor in the stang thats still all american muscle.
Click to expand...

He's already got that with his current configuration.
 

Warrior 102

New Member
Jan 22, 2003
231
0
0
Macomb MI
Jun 23, 2007
#29
  • Jun 23, 2007
  • #29
this is no a LS neder.........
I don't see anything wrong whit this do you? http://www.youtube.com/watch?v=BWx-XeaNMaY
by the way this is a 2v bored and stroked to 302 (tween turbo)
 

DCjuggalo

Member
May 18, 2003
169
0
16
Charlotte, NC
Jun 23, 2007
#30
  • Jun 23, 2007
  • #30
Warrior 102 said:
this is no a LS neder.........
I don't see anything wrong whit this do you? http://www.youtube.com/watch?v=BWx-XeaNMaY
by the way this is a 2v bored and stroked to 302 (tween turbo)
Click to expand...

that car has a sick idle. it says in the description its a 354 ci wher you get 302 from
 

Warrior 102

New Member
Jan 22, 2003
231
0
0
Macomb MI
Jun 23, 2007
#31
  • Jun 23, 2007
  • #31
DCjuggalo said:
that car has a sick idle. it says in the description its a 354 ci wher you get 302 from
Click to expand...

THE DUDE THAT POST THAT VIDEO THIS IS NOT HIS CAR,
I WAS RIDING THE ORIGINAL POST FROM THE OWNER ON MPH WEBSIDE, IF I REMEMBER CORECTLY
HI HAVE A 2V STROKER MOTOR WHIT TWEEN TURBO.....................
 

DCjuggalo

Member
May 18, 2003
169
0
16
Charlotte, NC
Jun 23, 2007
#32
  • Jun 23, 2007
  • #32
Warrior 102 said:
THE DUDE THAT POST THAT VIDEO THIS IS NOT HIS CAR,
I WAS RIDING THE ORIGINAL POST FROM THE OWNER ON MPH WEBSIDE, IF I REMEMBER CORECTLY
HI HAVE A 2V STROKER MOTOR WHIT TWEEN TURBO.....................
Click to expand...

wat the hell dude
 

Warrior 102

New Member
Jan 22, 2003
231
0
0
Macomb MI
Jun 23, 2007
#33
  • Jun 23, 2007
  • #33
TT Saleen #396 Video

--------------------------------------------------------------------------------

Here are the engine specs:
4.6 Modular 2V - stroked to 302
Stage II ported Heads
Stage II Blower cams
Full exhaust w/cut outs through stock THP Turbo Kit
Basic 57 MM THP Turbo Kit
Reichard Racing Intake
 
C

CENTENNIALSTANG

Member
Apr 15, 2005
0
0
16
Houston
Jun 23, 2007
#34
  • Jun 23, 2007
  • #34
i aint scarrrrrd. oh the guy with the TT saleen has blower cams and electric cut outs thats why it sounds good and if my buddies are right from albuquerque he only runs 11s in it. FYI
 

Halfrican

New Member
Jun 19, 2007
11
0
0
Springfield, MO
Jun 23, 2007
#35
  • Jun 23, 2007
  • #35
When I was buying a car I was blown away with the power and capabilities of the LS1 in several Camaro's and Trans Ams, but the cars were really ****ty. Flimsy plastic interiors, no trunk, hard to get in and out of, uncomfortable car in general. Also under the hood half the damn engine is underneath the windshield so It would be impossible for me to do anything on it myself when I move into a house. It also handled terrible and I felt like I was driving around a giant door wedge in terms of style.

The Mustang on the other hand didn't feel fast at all, but it was put together very well, handled well, and was very comfortable. And it had a trunk!

I bought the Mustang since the car is going to be my daily driver. After finding out that the T-56 Transmission is a direct replacement for mine, and the same tranny found in the Camaro's I realized there might be some kind of compatability with the power trains.

So I got this idea, why not combine what I liked about both cars? But yeah you guys are right, I didn't expect it to cost more than $10k and I was hoping there was some kind of kit to do this, but I guess it's not a common enough thing to do.

And yes I can make my Mustang way faster than a LS1, but doing those same mods to an LS1 would net even crazier results. Plus it would just be hilarious, I'd replace my GT emblems with Z28 ones but maintain the Ford logos.

Oh well, vortech it is.
 

mustangkid05

New Member
Mar 10, 2006
199
0
0
Jun 23, 2007
#36
  • Jun 23, 2007
  • #36
that would be crazy if i seen a mustang gt with SS emblems or something and then heard it rev lol
 

Serper3

New Member
Nov 1, 2005
120
0
0
Sunnyvale, Ca Bay Area close to san francisco
Jun 24, 2007
#37
  • Jun 24, 2007
  • #37
they have kits to put ls1's into rx7's..... i saw a ls1 swapped rx7 the other day at a meet driving by... it was amazing to see the *** car drive by with such an amazing exhaust note.... it was heard from 10 blocks away lol... everyone just stopped talking and watched the car....
 
T

thomas91169

I'd donkey punch my sister.
Aug 19, 2005
0
0
0
Modesto, CA
Jun 24, 2007
#38
  • Jun 24, 2007
  • #38
streetstang03 said:
This mustang has an LS1 in it:

Click to expand...

show me the proof.

otherwise im pretty sure ive seen that same pic but specs showing its a T77 single turbo modular 5.0 stroker with a fully build 4r70 behind it. those were the first things that came to mind when i saw that pic, even before i read you said it was LS1.


the LS1 is a great motor but its not the holy grail. i could think of countless other motors id slam into a car before doing a LS1. id just open a summit catalog. if im gonna swap a motor im gonna keep **** simple and go carb'd with a huge ****ing blower up top. no need to deal with all this fuel injected computer controlled cluster**** that way.
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Jun 24, 2007
#39
  • Jun 24, 2007
  • #39
thomas91169 said:
show me the proof.

otherwise im pretty sure ive seen that same pic but specs showing its a T77 single turbo modular 5.0 stroker with a fully build 4r70 behind it. those were the first things that came to mind when i saw that pic, even before i read you said it was LS1.


the LS1 is a great motor but its not the holy grail. i could think of countless other motors id slam into a car before doing a LS1. id just open a summit catalog. if im gonna swap a motor im gonna keep **** simple and go carb'd with a huge ****ing blower up top. no need to deal with all this fuel injected computer controlled cluster**** that way.
Click to expand...

That car was built by a local guy...this is what it looks like now. I can't remember the specifics but I know the guy who helped him build it. I'll get with him and get the progression.



Had a Chevy big block in the original pic. Now, if I am not mistaken he has a turbo in it.
 
L

Lookin4Stang

New Member
May 23, 2007
1
0
0
Jun 24, 2007
#40
  • Jun 24, 2007
  • #40
This whole GM vs Ford issue is rediculous. Put whatever motor you want in the car. I have owned 2 f-bodies in my life and currently want a Mustang. Both have their strong points and weaker points. I know a lot of GM guys who wouldn't hesitate to put a Ford rearend in their Camaro or Firebird. Bottom line... iots a stupid piece of metal and plastic and its your money going into it. Do what you want!
 
Prev
  • 1
  • 2
  • 3
Next
First Prev 2 of 3 Next Last
Status
Not open for further replies.

Similar threads

H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
310
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
J
1996 v6-v8 swap
  • jujuonurmom
  • Oct 28, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
201
1996 - 2004 SN95 Mustang -General/Talk- Oct 28, 2025
jujuonurmom
J
E
V8 Swap in a 95 - Wiring Help Needed
  • electricityisnotmyfriend
  • May 13, 2026
  • 1994 - 1995 Specific Tech
Replies
1
Views
94
1994 - 1995 Specific Tech May 21, 2026
Noobz347
8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
513
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
L
HELP finding Coyote Swap Shop???
  • Leo090
  • Jun 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
361
1996 - 2004 SN95 Mustang -General/Talk- Jun 4, 2025
Leo090
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?