• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Lx Left Me Stranded Again

  • Thread starter Thread starter LarsD
  • Start date Start date Mar 24, 2014
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Mar 24, 2014
#1
  • Mar 24, 2014
  • #1
Was on my way to work. Rolled up on a stop light and it died. I couldn't get it restarted. Last time it did this it ended up being the battery (intermittent cell). Not the case this time. Since it would spin over at normal speed, but wouldn't fire. Over the course of the next 15-20 minutes it would start to sputter more and more like it wanted to start until it eventually started. I was able to turn it around and get home. As of right now I am suspecting a fuel delivery problem, since it was acting like it wasn't getting fuel. Not entirely sure though. I stopped to listen if the fuel pump was priming at one point, but right after I did that it fired up. Of note, I pushed the accelerator all the way to the floor while I was trying to start the car, and it didn't sputter at all (this disables the injectors does it not?).
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Mar 24, 2014
#2
  • Mar 24, 2014
  • #2
run the codes but I suspect the dreaded TFI but the dust.
 
Reactions: elarm1

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Mar 24, 2014
#3
  • Mar 24, 2014
  • #3
mikestang63 said:
run the codes but I suspect the dreaded TFI but the dust.
Click to expand...

This is my guess as well.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,035
1,625
194
NJ
Mar 24, 2014
#4
  • Mar 24, 2014
  • #4
If it were lack of fuel you wouldn't hear the pump prime or wouldn't have any pressure at the shrader valve.

I'm with these guys, probably the tfi.
If it is, do not replace it with anything other than a ford unit, unless you want to do this again in 6 months.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Mar 24, 2014
#5
  • Mar 24, 2014
  • #5
2000xp8 said:
If it were lack of fuel you wouldn't hear the pump prime or wouldn't have any pressure at the shrader valve.

I'm with these guys, probably the tfi.
If it is, do not replace it with anything other than a ford unit, unless you want to do this again in 6 months.
Click to expand...
K rect o mundo. Do not get an aftermarket one. In fact , when I am at the JY I try and grab a spare one if I see one as cheap insurance.

Rock Auto has the best price on the Ford unit. They make them for T5 and AOD's.
 

larrym1961

5 Year Member
Dec 18, 2010
570
36
49
Idaho Falls Id
Mar 24, 2014
#6
  • Mar 24, 2014
  • #6
I always carry a spare TFI and a Motorcraft one at that.
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Mar 24, 2014
#7
  • Mar 24, 2014
  • #7
It better not be the TFI. The car has a new (~2K miles) distributor in it from Performance Distributors.

https://performancedistributors.com/product/ford-hot-forged-dui-distributors/
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,035
1,625
194
NJ
Mar 24, 2014
#8
  • Mar 24, 2014
  • #8
LarsD said:
It better not be the TFI. The car has a new (~2K miles) distributor in it from Performance Distributors.

https://performancedistributors.com/product/ford-hot-forged-dui-distributors/
Click to expand...

Well, clearly in the picture i can see the dyna mod TFI.
That thing is a POS.

Nothing beats a ford distributor and TFI.
 

smkshw

5 Year Member
Feb 12, 2010
1,095
235
94
Mar 24, 2014
#9
  • Mar 24, 2014
  • #9
i had 2 bad msd tfi's,put a 10 year old stock one on good to go....
 
Reactions: larrym1961

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Mar 24, 2014
#10
  • Mar 24, 2014
  • #10
2000xp8 said:
Well, clearly in the picture i can see the dyna mod TFI.
That thing is a POS.

Nothing beats a ford distributor and TFI.
Click to expand...

Weak. The worst part is I think you guys are right... I suspected fuel delivery, or a timing issue. Based on the simple fact that after the car sat for 15-20 minutes it fired back up. Actually, as it sat I kept trying to start it, and it slowly tried to fire more consistently. Why is it no one can make a TFI that is worth the plastic it is made from except for Ford? What are we going to do when that supply dries up?
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Mar 25, 2014
#11
  • Mar 25, 2014
  • #11
So....how new is it? As in still under warranty new? I'd at the very least get them to replace it.
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Mar 25, 2014
#12
  • Mar 25, 2014
  • #12
Gearbanger 101 said:
So....how new is it? As in still under warranty new? I'd at the very least get them to replace it.
Click to expand...

Just ran out like a couple weeks ago.
 

jetmech807

10 Year Member
Dec 1, 2011
1,195
326
164
Crestview, FL
Mar 25, 2014
#13
  • Mar 25, 2014
  • #13
LarsD said:
Just ran out like a couple weeks ago.
Click to expand...
Doesn't that make the answer to your problems obvious then?
 

larrym1961

5 Year Member
Dec 18, 2010
570
36
49
Idaho Falls Id
Mar 25, 2014
#14
  • Mar 25, 2014
  • #14
The TFI on my May Suddenly Die Pro Billet distributor went T/U less than a month after installation. Even though MSD replaced it with another one of their POS TFI's, I stuck a Motorcraft one on there and have been problem free since.
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Mar 25, 2014
#15
  • Mar 25, 2014
  • #15
I am hesitant to throw money at parts when i don't know for sure what the problem is. I'd hate to go through what I did before where I thought the car was fixed only to have it break down again on me.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,035
1,625
194
NJ
Mar 25, 2014
#16
  • Mar 25, 2014
  • #16
LarsD said:
I am hesitant to throw money at parts when i don't know for sure what the problem is. I'd hate to go through what I did before where I thought the car was fixed only to have it break down again on me.
Click to expand...
Look at it this way, you are replacing that dyna module sooner or later. So even if it's not that, it's good preventive maintenance.


You are looking for a part that cools off, then works again. The pip and tfi are the usual culprits.

There is actually a kit to relocate the TFI similar to what ford did with the 94/95. I usually see it on ebay.
 
Last edited: Mar 25, 2014

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Mar 25, 2014
#17
  • Mar 25, 2014
  • #17
Well I ordered a TFI relocation kit (was planning to do this anyway), and next month I'll order a new Ford TFI. Hopefully that fixes it. I let the car warm up today and I kept checking the timing on it to see if it was holding steady or not, and it was kinda jumping around a bit at idle, but that doesn't seem to unusual to me.
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
Aug 15, 2014
#18
  • Aug 15, 2014
  • #18
Update. Replaced the TFI with a new Ford unit and put it in with a relocation kit. Been driving the car on short trips into town. Decided today to drive it to work (30 miles one way). Ran great on the way in. Going home it was super hot outside, got about ten miles from home, had the cruise set at 65mph and it died. Took me 25 minutes to get it restarted. Went a 1/4 mile before it started choking out and sputtering and died again. Sat for another ten minutes or so and it fired up like nothing was wrong. Got it home, acts perfect. This is seriously frustrating. It is either the ECU, the PIP sensor, or the Quarter Horse is messing up. There is literately nothing else on the car that isn't new or extremely low mileage.

ETA: Just remembered the coil is original. Not sure if it would just refire right back up though while it is still hot.
 

modulistic

Active Member
Nov 26, 2002
383
30
29
Aug 15, 2014
#19
  • Aug 15, 2014
  • #19
I had a bad pip that took out my tfi module. Mine also died suddenly, replaced tfi, then ran great until it got hot and would start ing up again.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Aug 16, 2014
#20
  • Aug 16, 2014
  • #20
If it's your pick up try pulling out the spark advance plug next time it dies. I had this happen on a reman distributor abd it would die with the plug in.
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
737
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
L
1997 V6 Starting issue
  • leanzik04
  • Mar 20, 2026
  • SN95 V6 Mustang Tech
Replies
3
Views
252
SN95 V6 Mustang Tech Mar 20, 2026
Noobz347
F
2004 Mustang GT – Fuel Pump Not Priming
  • Fayio
  • Apr 22, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
319
SN95 4.6L Mustang Tech Apr 27, 2026
n0v8or
N
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
281
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
H
Engine 1992 mustang LX starting issue
  • Hdbandit
  • May 25, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
155
Fox 5.0 Mustang Tech May 25, 2025
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?