• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

M2300 Ebrake Adjust...

  • Thread starter Thread starter billison
  • Start date Start date Nov 26, 2016

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 26, 2016
#1
  • Nov 26, 2016
  • #1
Ok, working on the 5 lug swap. Used the adjustable cable. What's the goal here? Get it tight? I got it till the cables didn't have slack but it didn't do anything. I've not bled the system yet but didn't think that mattered. Figured I'd ask before I fight with it
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Nov 26, 2016
#2
  • Nov 26, 2016
  • #2
They will stretch, so don't go too crazy with your first adjustment. Get it right but not too tight that the rear wheels drag, and use the brake.

Just keep in mind the cable will stretch the first few weeks so you'll need to get under there and tighten it up a tad.

I think I tightened mine twice, and end result is the e brake will hold solid on relatively flat ground. Steep slopes, I'm nervous and park in gear.


Sent from my iPhone using Tapatalk
 
Reactions: Shakerhood

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Nov 26, 2016
#3
  • Nov 26, 2016
  • #3
You'll need to bleed the brakes simply to expand the pistons out. The rear w brake is mechanical but it ratchets out the piston only if it's fully in contact with the pad to begin with. If you haven't bled yet, might be too muchslack.


Sent from my iPhone using Tapatalk
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Nov 26, 2016
#4
  • Nov 26, 2016
  • #4
Got cha. I'll just leave it be till I get the rest done.
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,501
8,763
234
S.I.NY
Nov 26, 2016
#5
  • Nov 26, 2016
  • #5
Where did you end up finding that adjustable cable piece ? I need one for my swap as well I believe


Sent from my iPhone using Tapatalk
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Nov 26, 2016
#6
  • Nov 26, 2016
  • #6
Late model resto has em

https://lmr.com/item/M2810A/87-93-Mustang-Front-Parking-Brake-Cable-For-Rear-Disc-Brakes




Sent from my iPhone using Tapatalk
 
Reactions: TOOLOW91

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Dec 6, 2016
#7
  • Dec 6, 2016
  • #7
Just a quick update, got the mc changed and brakes bled and all seems fine. Gotta get wheels on it to know how it all feels , but as far as the cable, all seems fine.
 
Reactions: Mustang5L5

elarm1

10 Year Member
Dec 17, 2010
1,428
652
154
N.Va
Dec 6, 2016
#8
  • Dec 6, 2016
  • #8
This is the same one I have. Level ground it is fine but on any hill, I leave the car in gear. There is also no way to do a Ken block ebrake 180. I just don't think there is enough pressure
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,135
10,752
213
polk county florida
Dec 6, 2016
#9
  • Dec 6, 2016
  • #9
Is this e brake system on disc or drum?
 

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Dec 6, 2016
#10
  • Dec 6, 2016
  • #10
Disc. As far as my system goes, basically everything from a 95.
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,135
10,752
213
polk county florida
Dec 6, 2016
#11
  • Dec 6, 2016
  • #11
I know the e brake used on drums are suspect going backwards, they work better when you want it not to move forward but I've thought disc worked really good both directions. Why are they not holding or did I miss something?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Dec 6, 2016
#12
  • Dec 6, 2016
  • #12
I vote tightening them up. I had to retighten mine a few times and there's a small window where you can get it tight and they begin to drag.

Mine holds fast on level ground and good enough on a hill but I'll still put it in gear.


The factory e brake on my 2003gt was awesome. Would hold on the steepest hills, and I sometimes forgot to put in gear. However if i yanked it while moving it wouldn't lock wheels, just slow me up.


Sent from my iPhone using Tapatalk
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Dec 6, 2016
#13
  • Dec 6, 2016
  • #13
I had to adjust mine a few times too, I also want to say that I think I added a few washers or a spacer in there so I did not have to run the nuts all the way near the bottom of the adjustment.
 

Sick__fox

Member
Dec 15, 2016
7
4
13
Dec 16, 2016
#14
  • Dec 16, 2016
  • #14
Are you guys routing the new cables in the same location as your drum brake cables? I noticed when i did the swap i had to pull the new cables closer towards the inner drive shaft area to really get any tension. Even then the adjuster rod is almost maxed out and the car holds on level ground but i wouldnt trust it on anything else. You would thin after all these years the aftermarket parts world would have perfected this swap.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Dec 16, 2016
#15
  • Dec 16, 2016
  • #15
From what I remember, same routing. I believe the nuts were nearly maxed out when I finally got it in the correct range. If I need any more, i'll use a piece of SS tubing as a small spacer.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
Dec 16, 2016
#16
  • Dec 16, 2016
  • #16
As I mentioned above, I recall having to use a small spacer to get some extra adjustment.
 
You must log in or register to reply here.

Similar threads

S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
561
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
473
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
171
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
J
Help Figuring Motor Choice(Possible future turbo)?
  • jaygee15
  • Dec 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
922
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?