MAF Conversion Specific......

[Paul Perreca]

In the breif about the conversion harness, it says, simply connect the one end of the harness to the Mass air sensor, and connect the other end to the "EXISTING" speed density wiring harness that connects to the A9L....

NOW!!!!!
What exactly does it connect to or plug into!!!!, it says no cutting or splicing wires, so its gotta just be a plug, havnt seen the A9L comp yet, so does it just plug into that, along w/ the SD harness, or does the SD harness plug right into the A9L, and the conversion harness plugs into the SD harness, I'm all confused!!!!!! THANKS

Paul Perreca

 

[jerryD]

on the corral someplace is a write up on this. basicaly the wires do "plug" in to the original harness. you just need to get some EEC-IV pins to do it. checkout www.fordfuelinjection.com for more

 

[Paul Perreca]

bump

 

[Paul Perreca]

wat the frig lol does anyone have a used MAF sensor (just the sensor, not the whole tube, i believe the sensor is black and comes off w/ a torx bit) That is the only peice I need)

BTW, someone said you can get the conversion harness off ebay for 40, and since then, I still haven't been able to find it!!!!! HELP ME FIND IT!!
Paul Perreca

 

[jerryD]

go to the site posted above. they have it for $12, then you just by the terminals to connect to the computer.