MAF or Cold Air

A

alfman9

New Member

Apr 9, 2004

217

0

0

Florida

Apr 26, 2004

#1

• Apr 26, 2004

• #1

I had a BBK CAI unit on my 03 auto gt for awhile, but the car never ran right with it on so I took it off. I have the accufab tb and plenum on order and would like either of the afore mentioned to complement it. I was set to get the K&N FIPK, but then somebody told me about the maf. I was wondering which would be better and if there is a prefered brand. Any advice would be greatly appreciated.

 

slvrbullIT

New Member

May 27, 2003

635

0

0

Dallas, TX

Apr 26, 2004

#2

• Apr 26, 2004

• #2

get the k&n fipk, dont waste your money on a maf.

 

Zinc03GT

New Member

Apr 21, 2004

241

0

0

Mass

Apr 26, 2004

#3

• Apr 26, 2004

• #3

MAF over CAI...you can actually get a complete kit that combines the two...check densecharger.com

 

V

VatStang

New Member

Apr 4, 2004

88

0

0

Santa Clarita, CA

Apr 26, 2004

#4

• Apr 26, 2004

• #4

I actually tried the stock MAF with all my other intake stuff, and could feel little difference. Then, I put the MAF on and WOW! Get the intake and the MAF with the combination of the other mods (plenum and TB), and you'll really feel the difference.

 

StangLou

Active Member

Jul 9, 2003

1,264

0

36

Holly Springs, NC

Apr 26, 2004

#5

• Apr 26, 2004

• #5

What problems were you having with the BBK piece

 

A

alfman9

New Member

Apr 9, 2004

217

0

0

Florida

Apr 26, 2004

#6

• Apr 26, 2004

• #6

What about a maf to fit to the fipk?

 

A

alfman9

New Member

Apr 9, 2004

217

0

0

Florida

Apr 26, 2004

#7

• Apr 26, 2004

• #7

The bbk crap gave me a rough and tough idle, the car was a bear to start half the time, and it would stumble around the mid4k range if you were on it. Went back to my trusty kn drop in and all is fine.