Just installed a set of Maier racing 165race springs on the back of my '65. I think you'd call them 4-1/2 leaf mid-eyes with the leafs biased towards the front. That way, they prevent axle hop and eliminate the need for traction bars. I also installed Poly bushings on both ends with big beefy-looking shackles...
So -- they do seem to keep the axle planted pretty well. No more axle hop, and no perceptible axle wind-up (with the stock leafs, I could bounce the driveshaft off the tunnel - not so good). Cornering seems much improved, as well - loose enough to bring the back end around by stabbing the accelerator, but a pleasant amount of understeer in less aggressive driving. But the ride quality - oh my - is, um, 'harsh' to say the least. I'm not a cushy ride kind of guy, but with these springs, well... there might as well not be springs.
Chime in here folks - is there a better tradeoff between controlling axle movement and needing a kidney belt to go down a rough road?
So -- they do seem to keep the axle planted pretty well. No more axle hop, and no perceptible axle wind-up (with the stock leafs, I could bounce the driveshaft off the tunnel - not so good). Cornering seems much improved, as well - loose enough to bring the back end around by stabbing the accelerator, but a pleasant amount of understeer in less aggressive driving. But the ride quality - oh my - is, um, 'harsh' to say the least. I'm not a cushy ride kind of guy, but with these springs, well... there might as well not be springs.
Chime in here folks - is there a better tradeoff between controlling axle movement and needing a kidney belt to go down a rough road?