Manifold gaskets

[DCjuggalo]

im replacing my 2000's intake manifold with the newer one, can i reuse the old gaskets?

 

[GDawg]

I would replace the two lower ones ($21) but you can re-use the upper one for your upper plenum.

 

[MyEarsHurt]

Replace them, its cheap insurance and you dont want to get done with the install, have a leak, and have to do it all over again.

www.50resto.com has the gaskets for cheap...or maybe its shm(www.seanhylandmotorsports.com)....one of the two.

 

[tomustang]

Replace them, its cheap insurance and you dont want to get done with the install, have a leak, and have to do it all over again.

www.50resto.com has the gaskets for cheap...or maybe its shm(www.seanhylandisgay.com)....one of the two.

**** sean hyland


you can reuse your old gaskets, just clean them off good and check for cracks

 

[the98stang]

Replace them, its cheap insurance and you dont want to get done with the install, have a leak, and have to do it all over again.

www.50resto.com has the gaskets for cheap...or maybe its shm(www.seanhylandmotorsports.com)....one of the two.

:Word:

 

[GDawg]

you can reuse your old gaskets, just clean them off good and check for cracks

If MustangMods would ever respond to my emails and reinstate my paid account... I would show you the wear and tear on the lower gaskets from the heat of the heads. It's in my slide show. Replace... they are not meant to be reused. Upper one can be cause no real heat on the seal.

 

[tomustang]

If MustangMods would ever respond to my emails and reinstate my paid account... I would show you the wear and tear on the lower gaskets from the heat of the heads. It's in my slide show. Replace... they are not meant to be reused. Upper one can be cause no real heat on the seal.

that's why i said clean them off and check them. if they are fine he can reuse them

 

[Gearbanger 101]

The intake manifold gaskets are reusable, as are most modular gaskets. As long as they're in good contition, I wouldn't give it a second thought.

 

[03ghoststang]

The intake manifold gaskets are reusable, as are most modular gaskets. As long as they're in good contition, I wouldn't give it a second thought.

i also agree if they are in good condition reuse them but if not then just go buy new ones

 

[Mike97gt]

The intake manifold gaskets are reusable, as are most modular gaskets. As long as they're in good contition, I wouldn't give it a second thought.

+1 no problem with reusing them if they are in good shape. just make sur ehe rubber is not hard as a rock and flat.