mass air conversion question?

[robertdale]

I am having a hard time finding the EECIV connector pins to do the install. I noticed that I will need two pins to get the signal+-. I don't have the thermactor system any more. Can I use those two pins for the signal for the Mass air meter?

 

[Daggar]

I'm not exactly sure what you're saying here but if you're suggesting an attempt to remove and reuse the connectors then my suggestion would be to purchase new connectors.

They can be found here:
http://fordfuelinjection.com/index.php?p=21

 

[robertdale]

I was planning on removing them and leaving a few inches of wire on them. Then solder them to the Mass air meter wires.

 

[Daggar]

Yep... if you don't need them anymore, you could certainly do that.

 

[jrichker]

A trip to the junkyard to salvage some pins with the wire on them would be a better bet. All the 87-95 Fords used the same EECIV connector pins.