mass air conversion question?

R

robertdale

New Member

Jan 31, 2002

382

0

0

kentucky

Oct 3, 2006

#1

• Oct 3, 2006

• #1

I am having a hard time finding the EECIV connector pins to do the install. I noticed that I will need two pins to get the signal+-. I don't have the thermactor system any more. Can I use those two pins for the signal for the Mass air meter?

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Oct 3, 2006

#2

• Oct 3, 2006

• #2

I'm not exactly sure what you're saying here but if you're suggesting an attempt to remove and reuse the connectors then my suggestion would be to purchase new connectors.

They can be found here:
http://fordfuelinjection.com/index.php?p=21

 

R

robertdale

New Member

Jan 31, 2002

382

0

0

kentucky

Oct 3, 2006

#3

• Oct 3, 2006

• #3

I was planning on removing them and leaving a few inches of wire on them. Then solder them to the Mass air meter wires.

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Oct 3, 2006

#4

• Oct 3, 2006

• #4

Yep... if you don't need them anymore, you could certainly do that.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,811

234

Dublin GA

Oct 4, 2006

#5

• Oct 4, 2006

• #5

A trip to the junkyard to salvage some pins with the wire on them would be a better bet. All the 87-95 Fords used the same EECIV connector pins.