I know this question has probobly been asked a million times on here but i just can't seem to come up with a solid answer, so i thought i would get peoples opinions and go from there....
I currently have a 331 stroker motor producing 370hp at the rear wheels.. i have come across a Vortec S-trim supercharger kit and was thinking of rebuilding the engine and installing the kit. But i just keep hearing different stories on how much HP the stock blocks can handle.....Now i will be using a main girdle but this is still a street driven car so all strengthening devices must be street worthy... with 370 RWHP im guessing that the engine is producing 425-450 hp and with adding an s-trim to this combo running around 9-11pounds of boost i would guess the engines hp to around 625-650hp...
So my big question is what kills stock blocks? is it horsepower or engine RPM. And can a stock block handle 6000RPM and 650 hp?
Thanks
Dan
I currently have a 331 stroker motor producing 370hp at the rear wheels.. i have come across a Vortec S-trim supercharger kit and was thinking of rebuilding the engine and installing the kit. But i just keep hearing different stories on how much HP the stock blocks can handle.....Now i will be using a main girdle but this is still a street driven car so all strengthening devices must be street worthy... with 370 RWHP im guessing that the engine is producing 425-450 hp and with adding an s-trim to this combo running around 9-11pounds of boost i would guess the engines hp to around 625-650hp...
So my big question is what kills stock blocks? is it horsepower or engine RPM. And can a stock block handle 6000RPM and 650 hp?
Thanks
Dan