Mcleod BellHousing And Longtubes HELP

U

UpRise_5.0

Founding Member

Jun 16, 2002

664

1

16

Canada

Jan 29, 2004

#1

• Jan 29, 2004

• #1

Im installing a Mcleod BellHousing and FlowTech Longtubes, I know I will need to remove some of the sides of the bellhousing to get them to fit.

Does anyone know exactly how much to remove or have a picture of how much they removed so I know how much to take off.

 

U

UpRise_5.0

Founding Member

Jun 16, 2002

664

1

16

Canada

Jan 29, 2004

#2

• Jan 29, 2004

• #2

Bump

 

U

UpRise_5.0

Founding Member

Jun 16, 2002

664

1

16

Canada

Jan 29, 2004

#3

• Jan 29, 2004

• #3

Anyone?

 

U

UpRise_5.0

Founding Member

Jun 16, 2002

664

1

16

Canada

Jan 29, 2004

#4

• Jan 29, 2004

• #4

Cough...

 

TIMMY2734

Founding Member

May 17, 2002

1,330

1

36

Queens, NY

Jan 29, 2004

#5

• Jan 29, 2004

• #5

Every car will be different. Some have to do some grinding and some dont.

 

A

autoXr1

Founding Member

May 3, 2001

1,838

0

0

Michigan

Jan 29, 2004

#6

• Jan 29, 2004

• #6

You'll have to do it trial and error method. Once you get the transmission, bellhousing, engine installed...then drop the headers in. Only then will you know how much, if any, material you will have to remove. A good airgrinder with a 3-4" diameter course grit disc will make short work of it.

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Jan 29, 2004

#7

• Jan 29, 2004

• #7

autoXr1 said:

You'll have to do it trial and error method. Once you get the transmission, bellhousing, engine installed...then drop the headers in. Only then will you know how much, if any, material you will have to remove. A good airgrinder with a 3-4" diameter course grit disc will make short work of it.

Click to expand...

autoXr1, long time no see. You're new #'s in you're sig look super sweet I sold off my fti combo, now have a 418 stroker. Should be around 500+rwhp You gave me crap when I bought that nitrous system, is this along the same lines of that

 

U

UpRise_5.0

Founding Member

Jun 16, 2002

664

1

16

Canada

Apr 8, 2004

#8

• Apr 8, 2004

• #8

Anyone else?

 

408stroker5.0

The world would be a better place if all males jus

Mar 10, 2004

639

0

16

Bonnyville, Alberta, CANADA

Apr 8, 2004

#9

• Apr 8, 2004

• #9

There is also one other solution to your problem. Get rid of those el cheapo Flowtech Headers. I helped a friend install a set of Flowtech long tubes on his 5.0 Stang with a stock bellhousing yet and they fit like Sh**. I'm a performance parts retailer and I know for a fact that Flowtech is cheap stuff. Just look at the price and how they are made. Anyhow, I have a MCleod Steel Bellhousing on my Stang as well, and I used BBK Long Tubes and they fit quite well. They cleared the bellhousing with no problem and there was no modifications required. Do it right the first time man. Buy some good quality headers. That way you won't be banging and grinding a bunch of stuff and you wont be changing header & collector gasket's all the time.

 

U

UpRise_5.0

Founding Member

Jun 16, 2002

664

1

16

Canada

Apr 11, 2004

#10

• Apr 11, 2004

• #10

Anyone else?

 

U

UpRise_5.0

Founding Member

Jun 16, 2002

664

1

16

Canada

Apr 11, 2004

#11

• Apr 11, 2004

• #11

Bump

 

U

UpRise_5.0

Founding Member

Jun 16, 2002

664

1

16

Canada

Apr 12, 2004

#12

• Apr 12, 2004

• #12

Anyone?

 

408stroker5.0

The world would be a better place if all males jus

Mar 10, 2004

639

0

16

Bonnyville, Alberta, CANADA

Apr 12, 2004

#13

• Apr 12, 2004

• #13

UpRise_5.0 said:

Anyone?

Click to expand...

Stop asking.... "anyone?"
The answer is in my reply a couple of spaces up. If you ask anyone else on this board what your problem is, they will tell you it's the cheap headers. Go Buy some real header's and your problem's will be solved man. Anyone else agree? Hopefully Uprise_5.0, you will realise it's actually what the problem is. It's not the bellhousing. Cheap headers never fit proparly.

 

408stroker5.0

The world would be a better place if all males jus

Mar 10, 2004

639

0

16

Bonnyville, Alberta, CANADA

Apr 13, 2004

#14

• Apr 13, 2004

• #14

So what did you end up doing???

 

5.0 HOtrain

Founding Member

May 20, 2001

2,247

0

47

New Hampshire

Apr 14, 2004

#15

• Apr 14, 2004

• #15

I fit mine on the engine hoist, only had to grind a c/hair of by the starter.

 

TT91

Active Member

May 23, 2003

1,536

0

36

Paramus, NJ

Apr 14, 2004

#16

• Apr 14, 2004

• #16

i hope i dont run into any problems..doing the install in a few weeks..

 

93TealLx

Founding Member

Jul 1, 2001

334

0

0

Grove City Ohio

Apr 14, 2004

#17

• Apr 14, 2004

• #17

I dont know about the cheap headers bit. I have Bassani headers that I paid top dollar for with a McLeod bellhousing and I had to do a lot of grinding to get them to fit. Either way good luck!!!