Mechanical Water Temp and Oil Pressure Gauge ?

soontobefastfox · Jun 11, 2007

I just wanted to make sure of one thing. I am going to get Sport Comp II mechanical Oil pressure and water temp gauges. And I wanted to make sure that I can just put the sending units in replace of the electrical ones (replace the stock sending unit on the lower intake with the autometer mechanical one, and the same for the oil pressure which is on the block).

Thanks
Matt

HISSIN50 · Jun 11, 2007

You will have non-moving stock OP and water temp gauges, but you betcha you can do it.

Good luck.

soontobefastfox · Jun 11, 2007

HISSIN50 said:
You will have non-moving stock OP and water temp gauges, but you betcha you can do it.

Good luck.

Yep that's what I wanted to know! Yeah the OP and Water temp won't move but thats fine for the time being, I am eventually getting a Sport comp II 4 gauge instrustment cluster from Florida 5.0 (2-1/6 volt, fuel level and 3 3/8 tach and speedo).

Thanks HISSIN!

RYC CUKR · Jun 11, 2007

One thing that you will need to get for the water temp sensor to go in the stock location is an adapter. I believe that this is the adapter that you will need http://store.summitracing.com/partd...925228+4294923437+4294813350+115&autoview=sku
The gauge comes set up to go in a 1/2" NPT threaded hole but the threaded hole in the stock 5.0 intake is 3/8". I picked mine up at a local speed shop vs having to order it from summit.

soontobefastfox · Jun 11, 2007

RYC CUKR said:
One thing that you will need to get for the water temp sensor to go in the stock location is an adapter. I believe that this is the adapter that you will need http://store.summitracing.com/partd...925228+4294923437+4294813350+115&autoview=sku
The gauge comes set up to go in a 1/2" NPT threaded hole but the threaded hole in the stock 5.0 intake is 3/8". I picked mine up at a local speed shop vs having to order it from summit.

Thanks for the tip! Autometer has that tip online too in the installation section.

AnthonyR23 · Jun 12, 2007

I just looked up those gauge clusters from florida 5.0. I really like them... I read something about that cars with cruise control have a vehicle speed sensor that can be used with those florida 5.0 gauge clusters.. My question is regarding switching Speedo's from a KPH to 160 MPH Gauge... Would it be acurate? Or do you need to replace the Sensor aswell??

soontobefastfox · Jun 12, 2007

AnthonyR23 said:
I just looked up those gauge clusters from florida 5.0. I really like them... I read something about that cars with cruise control have a vehicle speed sensor that can be used with those florida 5.0 gauge clusters.. My question is regarding switching Speedo's from a KPH to 160 MPH Gauge... Would it be acurate? Or do you need to replace the Sensor aswell??

I'm not sure, but autometer does car kph speedos too I thought,,,

Mechanical Water Temp and Oil Pressure Gauge ?

soontobefastfox

Member

HISSIN50

"How long does it take to get help in here?

soontobefastfox

Member

RYC CUKR

soontobefastfox

Member

AnthonyR23

Member

soontobefastfox

Member

Similar threads

Mechanical Water Temp and Oil Pressure Gauge ?

soontobefastfox

Member

HISSIN50

"How long does it take to get help in here?

soontobefastfox

Member

RYC CUKR

soontobefastfox

Member

AnthonyR23

Member

soontobefastfox

Member

Similar threads

Privacy & Transparency

Privacy & Transparency