Melbourne area stangs

Glenn88lx · Jan 3, 2003

Hey guys, the shirts are in! I will bring them to the next auto-x in Palm Bay. If you need them sooner and want to pick them up you can catch me at work in the afternoons at BCC Cocoa campus, building 16 room 113.

dg28182 · Jan 3, 2003

the meet

So how 'bout that meet last night , guys? Good stuff , eh?

baglock1 · Jan 3, 2003

Re: Baglock1

Originally posted by 94_Teal_GT
Dan, were you still in need of factory rear springs? I still have my complete set that you are welcome to. Just let me know, when and where. I'll bring them to ya!

If you don't want them, I'll take them. I just need the rears.

erichmess_ · Jan 3, 2003

My tri-ax is squeaking when I go into 5th gear. Any ideas how to fix that?

eric kebbel · Jan 3, 2003

oh oh oh

kevin since dan needs the rears can i get dibbs on the front one s my coupe sits to low in the front with the long tubes there real close to the ground please thanks eric

baglock1 · Jan 3, 2003

Originally posted by erichmess_
My tri-ax is squeaking when I go into 5th gear. Any ideas how to fix that?

Have you tried greasing it?

erichmess_ · Jan 3, 2003

Originally posted by baglock1
Have you tried greasing it?

It wasn't making the sound a little while ago when I went out. Maybe it's self greasing.

94_Teal_GT · Jan 3, 2003

Attn: Baglock1 and Eric Kebbel

Originally posted by eric kebbel
kevin since dan needs the rears can i get dibbs on the front one s my coupe sits to low in the front with the long tubes there real close to the ground please thanks eric

Sure! They are just taking up space in the garage

Eric, the fronts are yours and Baglock you've got the rear springs. You guys just let me know, how you want me to get them to you......If there is no rush, I'll bring them to next AutoX, I probably won't be running, but I'll stop by to spectate. If either of you need them sooner, let me know.

david97gt46 · Jan 4, 2003

Hey guys, Had a oil leak on the stang i had checked out. Turned out to be a bad rear main seal(700$) and while they had the tranny off the motor i droped in a KING COBRA clutch. I'm going to have to relearn to drive. This clutch is amazing. Its a rock, but its quick to catch.

So a great start to 2003, a $1000 repair bill. o well at least I got something upgraded in the process.

See everyone later, might come down to the JAN autoX I've got a track day JAn 25-26 and need some seat time before then. If i dont make that on, I"ll see everyone in FEB.

erichmess_ · Jan 4, 2003

Originally posted by david97gt46
So a great start to 2003, a $1000 repair bill. o well at least I got something upgraded in the process.

drive. This clutch is amazing. Its a rock, but its quick to catch.
See everyone later, might come down to the JAN autoX I've got a track day JAn 25-26 and need some seat time before then. If i dont make that on, I"ll see everyone in FEB.

sucks about the leak, david. But at least you did get something new put in. I'm wanting one of those sometime, too. I guess it must be pretty stiff, eh?

Glenn88lx · Jan 4, 2003

Originally posted by david97gt46
Hey guys, Had a oil leak on the stang i had checked out. Turned out to be a bad rear main seal(700$) and while they had the tranny off the motor i droped in a KING COBRA clutch. I'm going to have to relearn to drive. This clutch is amazing. Its a rock, but its quick to catch.

So a great start to 2003, a $1000 repair bill. o well at least I got something upgraded in the process.

See everyone later, might come down to the JAN autoX I've got a track day JAn 25-26 and need some seat time before then. If i dont make that on, I"ll see everyone in FEB.

Damn! that sounds awful high for a rear main seal. How much was the labor rate? I would think I could do a rear main seal in about 5 hours or so. Figure another $200 tops for a clutch and your around $500 @ $60/hr plus incidentals and the seal.

Maybe I should open my own Mustang shop eh?

Ppower · Jan 4, 2003

Anyone seen the new issue of Motortrend with the 05' Mustang concept on the cover? Ack, it looks bad.

www.motortrend.com You can see the cover on their website.

Ppower

baglock1 · Jan 4, 2003

Re: Attn: Baglock1 and Eric Kebbel

Originally posted by 94_Teal_GT
If either of you need them sooner, let me know.

No rush for me. I appreciate it Kevin.

Sucks to hear about the main leak David, but like you said, you got the upgrade out of it. I may want to hop in your hoopty next time your down so I can compare the clutch to mine.

Anyone seen the new issue of Motortrend with the 05' Mustang concept on the cover? Ack, it looks bad.

That pic has been bounced all around the forums. I for one believe its a concept vehicle. But who knows? A few years ago, I would have figured the new T-bird to be a concept only too.

dg28182 · Jan 4, 2003

Originally posted by Ppower
Anyone seen the new issue of Motortrend with the 05' Mustang concept on the cover? Ack, it looks bad.

www.motortrend.com You can see the cover on their website.

Ppower

I don't like it much either. I didn't like the 99+ style when they first came out either, but the design really grew on me.

I like this better...

erichmess_ · Jan 4, 2003

Concept, but I am starting to like it the more i see it. I guess if I want it to stand out some, I'll grab some body kits.

Ppower · Jan 4, 2003

So, what is this Auto-x meet that happens in Palm Bay? Is there still a Melbourne Mustang website?

Ppower

Glenn88lx · Jan 4, 2003

Originally posted by Ppower
So, what is this Auto-x meet that happens in Palm Bay? Is there still a Melbourne Mustang website?

Ppower

You can check out the autocross website here.
http://www.eec.com/racing/

dg28182 · Jan 4, 2003

concept Vs. PS concept

here is the original erich..

dg28182 · Jan 4, 2003

concept Vs PS concept

...and mine...

erichmess_ · Jan 4, 2003

Re: concept Vs. PS concept

Originally posted by dg28182
here is the original erich..

Wow, you reversed the grilles.

Melbourne area stangs

Glenn88lx

dg28182

baglock1

The Bartender

erichmess_

Member 4 Life

eric kebbel

baglock1

The Bartender

erichmess_

Member 4 Life

94_Teal_GT

david97gt46

erichmess_

Member 4 Life

Glenn88lx

Ppower

New Member

baglock1

The Bartender

dg28182

erichmess_

Member 4 Life

Ppower

New Member

Glenn88lx

dg28182

dg28182

erichmess_

Member 4 Life

Similar threads

Melbourne area stangs

The Bartender

Member 4 Life

The Bartender

Member 4 Life

Member 4 Life

New Member

The Bartender

Member 4 Life

New Member

Member 4 Life

Similar threads

Privacy & Transparency

Privacy & Transparency