Melbourne area stangs

#7,361
<----Wishes he had the money to buy a pair of oxygen sensors, MSD wires, and sleeves so I could finally get this thing running some semblance of normal. I'm bored...maybe I'll check my compression. Gramps brought his 50 year old gauge over... Damn thing still works. Gotta love Gramps' old tools. :D
 
#7,362
uuuuhhhhggggg

well i think i found the trouble with the coupe the fmu is bad an the fuel pressure was set way to high. runs great w/o the fmu an the pressure set at 38 not 46 where it was at . now it restrats when its hot . so with that done its time to break out the welder an go to town


still got these billet 4 lugs 4 sale
 
#7,364
Originally posted by baglock1
I'm back and let me tell you... I missed this FL weather. I also forgot how fun a good running mustang can be. Rumor has it that a white GTS was doing 135 down the I-95 for 10 minutes plus yesterday but I can't confirm or deny that.

On a seperate note, there's a white GTS for sale down on the A1A past Eau Gallie.
Click to expand...

Welcome back baggie! Looking forward to seeing you around again.

Are you now going to have the time to install your MM parts? The Martin club is having an AX next Saturday if your looking for an event.
 
#7,365
Originally posted by erichmess_
Yours? :shrug: :confused: :scratch:
Click to expand...

No, another one. The wife actually noticed it and hinted that it'd be kinda cool to have another one so she could have one for herself. Personally, I'm thinking the RX-8's are looking pretty nice myself.

Originally posted by Glenn88lx
Welcome back baggie! Looking forward to seeing you around again.

Are you now going to have the time to install your MM parts? The Martin club is having an AX next Saturday if your looking for an event.
Click to expand...

Sounds good to me. I'll have to see what the wife has planned, but I'm pretty sure I can get out for a few hours. The parts will have to wait though. I decided to go ahead and order the rear c/o's, 98 spindles, and prolly the PHB as well. I'll end up waiting for those parts so I can do the install all at the same time.
 
#7,367
Originally posted by 5.0's 4 ever
Hey bag I'm still interested in getting another set of 94-95 spindles for my hatchback. So when ever you do the 98 swap give me a notice and I will buy them from you if you already don't have them sold.
Click to expand...

I'll consider you as having first dibs. I'll PM you whenever they become available.
 
#7,368
Originally posted by baglock1
No, another one. The wife actually noticed it and hinted that it'd be kinda cool to have another one so she could have one for herself. Personally, I'm thinking the RX-8's are looking pretty nice myself.
Click to expand...

I dunno, it would be cool to have a second GTS. If you got it maybe you could finally put in that roll cage you've been wanting forever, along with whatever other goodies your wife doesn't want on your car.
 
#7,369
Re: way to go kevin

Originally posted by eric kebbel
humm 86 with a h pipe we can put dauls on it it was offerd on those cars hey i got an extra set of shorty headers an a set of 3.55 gears wanna build a sleeper lol well good luck with it
Click to expand...

I actually found a message board dedicated to Crown Vic, Grand Marq, and Town Cars. :D From what I've read so far, a dual setup and 3.55 gears are very helpful for these barges. AAAAANNND, you can use an H-pipe from a Fox if you use Fox headers, but the rest has to be fabricated. So I won't be making any mods to it anytime soon :(
Um and yeah some of these guys actually 1/4 mile these things, with pretty good times for a 4200lb car.
They are doing or have done a tech article on complete 5.0 S.O. to 5.0 H.O conversion for the 86-91 Panther chassis cars. :D
 
#7,370
If anybody needs some PI cams or Ford C springs, Post because im selling both. $80 for the springs, and make me an offer for the cams. I might also be selling my SHM blower cams with a .495 lift, 230 duration, because I wanna go bigger. I will let you guys know soon about the SHM cams.
 
#7,375
Originally posted by baglock1
Sounds good to me. I'll have to see what the wife has planned, but I'm pretty sure I can get out for a few hours. The parts will have to wait though. I decided to go ahead and order the rear c/o's, 98 spindles, and prolly the PHB as well. I'll end up waiting for those parts so I can do the install all at the same time.
Click to expand...

I'm afraid you won't see me there after all Glenn. I just found out I'll be out of town again. Leaving in a few hours, be back next week some time.

If you guys want to go ahead and draft up the "We-Don't-Want-You-In-Our-Club-Any-More-Because-You-Miss-Too-Many-Meetings" paperwork, I'll be sure to sign it just as soon as I can actually attend another meeting. ;)
 
#7,376
Dan, where you gotta go now? Or is it classified?

Well, somehow, we managed to rip the wing off a Mach1 at the car wash today. :shrug: It was just going through the wash and then two bang sounds, and the wing was on the tunnel floor. Great quality control, Ford. :rolleyes:

Happy b-day Dave!
 
#7,377
Originally posted by baglock1
I'm afraid you won't see me there after all Glenn. I just found out I'll be out of town again. Leaving in a few hours, be back next week some time.
Click to expand...

Damn Dan, they keep you hopping don't they? Well there is always the SCCA event on the 25th. See you there...maybe.

Good luck with whatever it is your up to this week.
 
#7,378
Originally posted by erichmess_
Dan, where you gotta go now? Or is it classified?

Well, somehow, we managed to rip the wing off a Mach1 at the car wash today. :shrug: It was just going through the wash and then two bang sounds, and the wing was on the tunnel floor. Great quality control, Ford. :rolleyes:

Happy b-day Dave!
Click to expand...
I heard about that today.Its not fords fault.Its YOUR great quality control of the carwash brushes.:nice:

LOL just kidding.Did it just plain rip the wing off the trunk?I wont go into those things no more sense the R wing went on.I know for sure those things would rip it off my trunk.

Well happy im getting older by the minute dave.:jester:
 
#7,379
Originally posted by erichmess_
Dan, where you gotta go now? Or is it classified?

Well, somehow, we managed to rip the wing off a Mach1 at the car wash today. :shrug: It was just going through the wash and then two bang sounds, and the wing was on the tunnel floor. Great quality control, Ford. :rolleyes:

Happy b-day Dave!
Click to expand...

This isn't all that uncommon. I have been to carwashes that WILL NOT run my Cobra through because of the wing. Seems the brushes (strings) can wrap around the wing and rip it off. A touchless carwash avoids this situation. I would venture to say that the wing would still be attached had it not been for the carwash brush. :(
 
#7,380
Ditto on the happy birthday, Dave! Still gonna buy me that rum? :D

Anyone have a guess on how much a manual fan and fan clutch is gonna cost? My electric one bit the dust today and overheated my car. Without a heater core, I got lucky as hell. Refilled the rad after it gushed what was left out and drove it home speeding a little to keep the airflow up. I got luuuucky. I found a not blown, but MELTED and utterly destroyed fusible link tied directly to my battery... Question is, whether the link died from a voltage spike from the alternator or battery (?), or whether the fan motor died and doubled the current back to the fuse... :damnit:

:uzi: FORD
 
You must log in or register to reply here.

Similar threads

K
Introduction
Replies
1
Views
108
The Welcome Wagon
gkomo
gkomo
F
Help with air bag code 2293
Replies
0
Views
58
2005 - 2009 Specific Tech
Felwinters
F
E
2007 GT Stalls when lights or a/c turned on
Replies
2
Views
58
2005 - 2009 Specific Tech
ejscarfo
E
F
Need body/paint shop in san jose area
Replies
6
Views
590
1965 - 1973 Classic Mustangs -General/Talk-
Noobz347
Noobz347
S
Rust under side window weatherstrip
Replies
0
Views
124
2005 - 2014 S-197 Mustang -General/Talk-
swe13
S
Top Bottom
Back
Forums
Menu