mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #1 Feb 19, 2009 #1 Is the metal coolant line on the passenger side of the intake that goes to the heater core and water pump reverse thread? mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #2 Feb 19, 2009 #2 anyone? Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #3 Feb 19, 2009 #3 Yes, the bottom part will thread out and remain connected to the top part - remember to use a second wrench when holdint the top part to prevent damaging the line. Walz mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #4 Feb 19, 2009 #4 so the bottom part is reverse thread? Ive taken it out before I just cant remember mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #5 Feb 19, 2009 #5 if someone could confirm this, this would help alot so I can get my intake off, thanks! Vinnietbird Member Jun 2, 2005 584 3 19 Feb 19, 2009 #6 Feb 19, 2009 #6 No,not reverse thread.I just swapped mine after having the water tube nipple for the EGR spacer ground off and welded shut. mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #7 Feb 19, 2009 #7 ok thank you, im gonna need a wrench with more torque, I only have a stubby open end, definatly not working. Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #8 Feb 19, 2009 #8 yea, the bottom one is the one that turns. Walz 4G-KDMP 10 Year Member Jul 23, 2005 935 19 39 CA Feb 19, 2009 #9 Feb 19, 2009 #9 Wallzy said: yea, the bottom one is the one that turns. Click to expand... I agree completely! You must log in or register to reply here. Similar threads Engine Retorque lower intake manifold bolts 91GTstroked Sep 8, 2025 Fox 5.0 Mustang Tech Replies 3 Views 299 Fox 5.0 Mustang Tech Sep 8, 2025 Noobz347 K 86 GT Water Pump Kade5114 May 11, 2026 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Replies 3 Views 95 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026 nickyb D Engine Coolant and Radio Issues Don7Up Sep 14, 2025 Fox 5.0 Mustang Tech Replies 17 Views 618 Fox 5.0 Mustang Tech Oct 4, 2025 Don7Up D D Please help with vacuum lines Dawgs000082 May 10, 2026 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Replies 2 Views 116 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026 Dawgs000082 D P Engine Mysterious coolant leak at back of engine palerider94 Jan 18, 2026 Fox 5.0 Mustang Tech Replies 1 Views 182 Fox 5.0 Mustang Tech Jan 19, 2026 AeroCoupe Share: Bluesky Email Share Link
Is the metal coolant line on the passenger side of the intake that goes to the heater core and water pump reverse thread?
mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #2 Feb 19, 2009 #2 anyone? Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #3 Feb 19, 2009 #3 Yes, the bottom part will thread out and remain connected to the top part - remember to use a second wrench when holdint the top part to prevent damaging the line. Walz mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #4 Feb 19, 2009 #4 so the bottom part is reverse thread? Ive taken it out before I just cant remember mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #5 Feb 19, 2009 #5 if someone could confirm this, this would help alot so I can get my intake off, thanks! Vinnietbird Member Jun 2, 2005 584 3 19 Feb 19, 2009 #6 Feb 19, 2009 #6 No,not reverse thread.I just swapped mine after having the water tube nipple for the EGR spacer ground off and welded shut. mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #7 Feb 19, 2009 #7 ok thank you, im gonna need a wrench with more torque, I only have a stubby open end, definatly not working. Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #8 Feb 19, 2009 #8 yea, the bottom one is the one that turns. Walz 4G-KDMP 10 Year Member Jul 23, 2005 935 19 39 CA Feb 19, 2009 #9 Feb 19, 2009 #9 Wallzy said: yea, the bottom one is the one that turns. Click to expand... I agree completely! You must log in or register to reply here. Similar threads Engine Retorque lower intake manifold bolts 91GTstroked Sep 8, 2025 Fox 5.0 Mustang Tech Replies 3 Views 299 Fox 5.0 Mustang Tech Sep 8, 2025 Noobz347 K 86 GT Water Pump Kade5114 May 11, 2026 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Replies 3 Views 95 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026 nickyb D Engine Coolant and Radio Issues Don7Up Sep 14, 2025 Fox 5.0 Mustang Tech Replies 17 Views 618 Fox 5.0 Mustang Tech Oct 4, 2025 Don7Up D D Please help with vacuum lines Dawgs000082 May 10, 2026 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Replies 2 Views 116 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026 Dawgs000082 D P Engine Mysterious coolant leak at back of engine palerider94 Jan 18, 2026 Fox 5.0 Mustang Tech Replies 1 Views 182 Fox 5.0 Mustang Tech Jan 19, 2026 AeroCoupe Share: Bluesky Email Share Link
Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #3 Feb 19, 2009 #3 Yes, the bottom part will thread out and remain connected to the top part - remember to use a second wrench when holdint the top part to prevent damaging the line. Walz
Yes, the bottom part will thread out and remain connected to the top part - remember to use a second wrench when holdint the top part to prevent damaging the line. Walz
mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #4 Feb 19, 2009 #4 so the bottom part is reverse thread? Ive taken it out before I just cant remember mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #5 Feb 19, 2009 #5 if someone could confirm this, this would help alot so I can get my intake off, thanks! Vinnietbird Member Jun 2, 2005 584 3 19 Feb 19, 2009 #6 Feb 19, 2009 #6 No,not reverse thread.I just swapped mine after having the water tube nipple for the EGR spacer ground off and welded shut. mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #7 Feb 19, 2009 #7 ok thank you, im gonna need a wrench with more torque, I only have a stubby open end, definatly not working. Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #8 Feb 19, 2009 #8 yea, the bottom one is the one that turns. Walz 4G-KDMP 10 Year Member Jul 23, 2005 935 19 39 CA Feb 19, 2009 #9 Feb 19, 2009 #9 Wallzy said: yea, the bottom one is the one that turns. Click to expand... I agree completely! You must log in or register to reply here. Similar threads Engine Retorque lower intake manifold bolts 91GTstroked Sep 8, 2025 Fox 5.0 Mustang Tech Replies 3 Views 299 Fox 5.0 Mustang Tech Sep 8, 2025 Noobz347 K 86 GT Water Pump Kade5114 May 11, 2026 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Replies 3 Views 95 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026 nickyb D Engine Coolant and Radio Issues Don7Up Sep 14, 2025 Fox 5.0 Mustang Tech Replies 17 Views 618 Fox 5.0 Mustang Tech Oct 4, 2025 Don7Up D D Please help with vacuum lines Dawgs000082 May 10, 2026 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Replies 2 Views 116 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2026 Dawgs000082 D P Engine Mysterious coolant leak at back of engine palerider94 Jan 18, 2026 Fox 5.0 Mustang Tech Replies 1 Views 182 Fox 5.0 Mustang Tech Jan 19, 2026 AeroCoupe Share: Bluesky Email Share Link
mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #5 Feb 19, 2009 #5 if someone could confirm this, this would help alot so I can get my intake off, thanks! Vinnietbird Member Jun 2, 2005 584 3 19 Feb 19, 2009 #6 Feb 19, 2009 #6 No,not reverse thread.I just swapped mine after having the water tube nipple for the EGR spacer ground off and welded shut. mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #7 Feb 19, 2009 #7 ok thank you, im gonna need a wrench with more torque, I only have a stubby open end, definatly not working. Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #8 Feb 19, 2009 #8 yea, the bottom one is the one that turns. Walz 4G-KDMP 10 Year Member Jul 23, 2005 935 19 39 CA Feb 19, 2009 #9 Feb 19, 2009 #9 Wallzy said: yea, the bottom one is the one that turns. Click to expand... I agree completely! You must log in or register to reply here.
Vinnietbird Member Jun 2, 2005 584 3 19 Feb 19, 2009 #6 Feb 19, 2009 #6 No,not reverse thread.I just swapped mine after having the water tube nipple for the EGR spacer ground off and welded shut.
No,not reverse thread.I just swapped mine after having the water tube nipple for the EGR spacer ground off and welded shut.
mob the guy who hits on his mom 20+ Year Stangneter Oct 3, 2003 2,566 136 104 Dallas, TX Feb 19, 2009 #7 Feb 19, 2009 #7 ok thank you, im gonna need a wrench with more torque, I only have a stubby open end, definatly not working. Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #8 Feb 19, 2009 #8 yea, the bottom one is the one that turns. Walz 4G-KDMP 10 Year Member Jul 23, 2005 935 19 39 CA Feb 19, 2009 #9 Feb 19, 2009 #9 Wallzy said: yea, the bottom one is the one that turns. Click to expand... I agree completely!
ok thank you, im gonna need a wrench with more torque, I only have a stubby open end, definatly not working.
Wallzy New Member Aug 20, 2006 128 0 0 Orlando, FL Feb 19, 2009 #8 Feb 19, 2009 #8 yea, the bottom one is the one that turns. Walz
4G-KDMP 10 Year Member Jul 23, 2005 935 19 39 CA Feb 19, 2009 #9 Feb 19, 2009 #9 Wallzy said: yea, the bottom one is the one that turns. Click to expand... I agree completely!