Moog ball joint question

S

sixtyfive

Member

Jan 9, 2004

157

0

16

Apr 15, 2011

#1

• Apr 15, 2011

• #1

I am in the process of installing moog upper ball joints. I am a little stumped as to how the shim retainer peice is supposed to fit on the ball joint. When the piece is on correctly, tightening the bolts warps it out of shape. When I leave the retainer piece off, the boot flexes out more than it should.

What would be the best way to bolt the ball joint to the uca?

Oh and here is a teaser build pic

 

Edster

Founding Member

Aug 13, 2000

500

1

19

League City, Texas

Apr 16, 2011

#2

• Apr 16, 2011

• #2

Looks like ya got it on right. I wouldn't worry about the metal shim warping as long as it does what its supposed to do. I've done several front ends on several cars and it was never an issue with the shim piece. I've installed them just like that and had no issues.

 

65ShelbyClone

Founding Member

Sep 9, 2000

4,675

38

119

Antelope Valley, SoCal

Apr 16, 2011

#3

• Apr 16, 2011

• #3

Does the shim fit better if its flipped over? It looks upside-down to me.

 

S

sixtyfive

Member

Jan 9, 2004

157

0

16

Apr 16, 2011

#4

• Apr 16, 2011

• #4

It does fit better flipped over, but then the metal does not cup around the rubber boot which allows the boot to flip out just like if the retainer was not used. I could try placing some washers in between the retainer and the ball joint.

 

S

sixtyfive

Member

Jan 9, 2004

157

0

16

Apr 17, 2011

#5

• Apr 17, 2011

• #5

It took me about all day to figure it out, but the retainer goes over the rubber boot! I am glad to finally be done compressing and decompressing springs