Motor Mounts

[HaeLee82]

I want to get polyurethane motor mounts for my 2.3 tubo mustang but all I have found are V-8 ones. What is the difference between them? Can I use the v-8 mounts? If not does anybody know where Ican buy them for the 4 cylinders?


Thanks in advance

 

[Ray III]

heres what you do. Get a bit of rope and tie it to your intake, pull it more or less tight with about an inch of slack and tie the other end to the top of your driverside strut. Then get a whole bunch of bungee cords and hook them all between the middle of the rope and the crossmember in front of the top of your radiator. BOOM you have a budget engine torsion damper!!! Now to find some ground marking paint to dress it up.

 

[kiddiccarus]

Ray you forgot to add the duct tape for the blow through vam.

 

[HaeLee82]

............ thanks alot for the f---ing help.

If I knew where to find simple polyurethane motor mounts AND if I knew if I could use the V-8 mounts I wouldnt be on here wasting my time with idiots like you two!

 

[Stinger]

There are non available aftermarket, there is a guy by the name of Chuck W here:
http://www.turboford.org/ubb/ultimatebb.php?ubb=get_topic;f=6;t=006018

 

[kiddiccarus]

............ thanks alot for the f---ing help.

If I knew where to find simple polyurethane motor mounts AND if I knew if I could use the V-8 mounts I wouldnt be on here wasting my time with idiots like you two!

Hey man, you have to have a sense of humor on a forum, lighten up some.

 

[Ray III]

 

[HaeLee82]

There are non available aftermarket, there is a guy by the name of Chuck W here:
http://www.turboford.org/ubb/ultimatebb.php?ubb=get_topic;f=6;t=006018

Thanks Stinger!! Sadly when I clicked on the link it doesnt work I guess due to site work.

"FYI
Hey Y'all!

I need to do some work on the board for a while. Check back in a little bit. Thanks!!

» Please use your browser's back button to return."

But thanks stinger by the way I will sometime prolly need to order some exhaust from you but I need to get the camaro taken care of then help haelee with the mustang. Thanks
Rich

-89Stang on haelee's s/n

 

[kiddiccarus]

When you go to the turboford page look into the gropu purchases. Chuck has set up some purchases for the mustang style 1 and 3 in there. The link that Stinger posted for you is to a Turbocoupe Mount. I am thinking of going in on this purchase also. Clay will have the site up and running withing a day though.