Motorcraft PCV Part Number..

[sixt9coug]

I put an Autozone PCV valve in my 94 GT a few months back and well, being an anal retentive prick sometimes makes me uneasy about things. I don't like that it has two ports on it. I don't like that it has a 90 degree bend on it, and I don't like that since I installed it, the car seems to be idling a little higher at times.

So I am thinking vacuum leak from the PCV valve area but instead of replacing it with Autozone parts, I want to use Motorcraft parts.

Anyone have the Motorcraft numbers for the PCV valve and grommet?

 

[alleymad95GT]

http://www.fordparts.com/Commerce/C...HaGlzdG9yeQUEdHJ1ZbeJQwrDnn1brKWLK+LH7viyyDAr

6A666 (EV-98-B) - Motorcraft PCV valve

6A631 (FA-1068) - Motorcarft PCV filter

6A892 - Ford grommet

 

[sixt9coug]

You sir, are a gentleman and a scholar. Thanks!

 

[legalize420]

ditch the the 90 with 2 holes. it is an additional piece that is removable. just pull and it will come off the pcv.

 

[95Vert383AOD]

I personally like and use the all metal PCV. The local parts store lets me pick my own parts. I was never a fan of the plastic or the 90 deg. bend

 

[bp50]

ditch the the 90 with 2 holes. it is an additional piece that is removable. just pull and it will come off the pcv.[/QUOTE

+1

 

[GTA_V6_Mustang]

ditch the the 90 with 2 holes. it is an additional piece that is removable. just pull and it will come off the pcv.

+2 Ive done that for all my stangs and never had a problem.