Mounting oil pickup with ARP main bolts?

95_5.0_stang · Mar 10, 2007

Well, I have a set of ARM main BOLTS for the motor I'm putting together. I just realized I'm going to need something to mount the oil pickup to the main cap with. Do I call up summit and ask for 1 ARP stud..or what should I do? Thanks.

wild86stang · Mar 10, 2007

You basically have to order 1 stud and an extra nut. I had the same problem. Just tell them what you're doing and they'll be able to figure it out. I think I had to get one stud from the studs they use with windage trays (but I could be wrong).

Busted07 · Mar 10, 2007

when i bought my pump, i ordered the mounting hardware (made by ARP, sold by summit) it comes with the bolt and nut ya need.

95_5.0_stang · Mar 11, 2007

FarBeyondDriven said:
when i bought my pump, i ordered the mounting hardware (made by ARP, sold by summit) it comes with the bolt and nut ya need.

Could you tell me the part number of that? I'd really appreciate it. Thanks.

Busted07 · Mar 11, 2007

95_5.0_stang said:
Could you tell me the part number of that? I'd really appreciate it. Thanks.

If you still have your stock pickup tube on there, save the nut and reuse it. It doesnt go through that much stress that you need to find an ARP one for it. As far as the others...

Pump to pickup

http://store.summitracing.com/partdetail.asp?part=ARP-154-7005&autoview=sku

Then i bought these to mount the pump to the block..

http://store.summitracing.com/partdetail.asp?part=ARP-150-6901&autoview=sku

Make sure you use new gaskets and if youre actually putting in a new pump, you might as well go with the ARP hardened oil pump drive shaft. Make sure you read the directions on how to clearance it as well. If youre buying a new ford or melling pump, i would go with the arp hardened shaft, even though most pumps come with a shaft i would go with the arp stuff instead.

http://store.summitracing.com/partdetail.asp?part=ARP-154-7904&autoview=sku

BlackBaer5.0 · Mar 11, 2007

Well, I think your talking about the same problem I have... The ARP bolts do not have a bolt with a stud for the oil pickup tube to attach to the #3 main cap...

Well arp does not make a bolt like the one that came from ford, for the oil pickup tube. I used the arp studs on the all the others, and I order ford main caps bolts for the number 3 cap. 16 bucks for the bolt/ stud and 12 bucks for the reg bolt.
I got it from a local ford dealer( Ford racing dealer), Im picking mine up tomorrow..

95_5.0_stang · Mar 14, 2007

FarBeyondDriven said:
If you still have your stock pickup tube on there, save the nut and reuse it. It doesnt go through that much stress that you need to find an ARP one for it. As far as the others...

Pump to pickup

http://store.summitracing.com/partdetail.asp?part=ARP-154-7005&autoview=sku

Then i bought these to mount the pump to the block..

http://store.summitracing.com/partdetail.asp?part=ARP-150-6901&autoview=sku

Make sure you use new gaskets and if youre actually putting in a new pump, you might as well go with the ARP hardened oil pump drive shaft. Make sure you read the directions on how to clearance it as well. If youre buying a new ford or melling pump, i would go with the arp hardened shaft, even though most pumps come with a shaft i would go with the arp stuff instead.

http://store.summitracing.com/partdetail.asp?part=ARP-154-7904&autoview=sku

Thanks...but are you sure that the ARP stud is included with either of those top two links you gave me? I don't see it in any of the pictures of the parts?

95_5.0_stang · Mar 17, 2007

Thanks...but are you sure that the ARP stud is included with either of those top two links you gave me? I don't see it in any of the pictures of the parts?

Yellowpnoy · Mar 17, 2007

Canton racing makes one to mount the pickup to the cap, i dont have the part # here, but you can get it from them directly, just call and they will hook you up!

Mounting oil pickup with ARP main bolts?

95_5.0_stang

New Member

wild86stang

New Member

Busted07

I need my gorilla to be about an inch longer.

95_5.0_stang

New Member

Busted07

I need my gorilla to be about an inch longer.

BlackBaer5.0

Member

95_5.0_stang

New Member

95_5.0_stang

New Member

Yellowpnoy

New Member

Similar threads

Mounting oil pickup with ARP main bolts?

New Member

New Member

I need my gorilla to be about an inch longer.

New Member

I need my gorilla to be about an inch longer.

Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency