If you are near stock, not running power adders, your ignition (and dizzy) are in good shape, and dont live at redline, IMHO you probably wont see any difference.
unless you have a revlimiter you can tach as high as you want i guess. you might want to change the valve springs if your gonna try taching much higher though.
As stated earlier, the best upgrade for more rpm would be better valve springs. If your still using the factory computer you wont be able to rev much higher than 6200 without a rpm extender. The stock ford dizzy isn't that bad. People run in the 9's with them. I would upgrade the coil before the distributor...PB
With a stock or near stock engine, power drops off dramatically after 5100 RPM. This is a function of the flow restrictions in the lower intake and heads. A ported TMOSS lower or Explorer intake is the inexpensive fix and will extend the power upwards maybe another 200-300 RPM.
To make good power above 5400 RPM, you'll need better heads. At that point, more power is a function of how many $$$ you want to spend. Spend more and you get more HP at higher RPMs.