Mustang Round Up Ride N Drive
- Thread starter MTMMAN
- Start date
S351Saleen77
Member
Merc331 said:
Exactly!! They made 328 S351's total in 7 years of production. Thats why you see them everywhere!!
352Ford2
New Member
How big of sticklers are they on the engine compartment needing to be oil and grease free? I have no issues passing tech when I run at the drags, but they don’t have the rule written that harshly. I don’t think I will have a chance to put my fresh engine in the LX in two weeks either.
NayChan
New Member
I'm going to the cruise on the 14th. We're bringing out the 06 Stang.
Oh yeah.. BTW.. I hardly ever drive the '04 now. My fiance and I bought a 2006 a little over a month ago..
Oh yeah.. BTW.. I hardly ever drive the '04 now. My fiance and I bought a 2006 a little over a month ago..
hollant
Founding Member
Shangsta
New Member
If i didnt have orientation on the track day i would be rippen it up with you guys. Have fun and take lots of pics/vids
2004mysticobra
New Member
bill89saleen304
Member
Rounup Info
Just go to this link at Mustangs NW.
It has all the info, and you can print a registration form from the site!
See Ya Friday
http://www.mustangsnorthwest.com/
Bill
Just go to this link at Mustangs NW.
It has all the info, and you can print a registration form from the site!
See Ya Friday
http://www.mustangsnorthwest.com/
Bill
bill89saleen304
Member
I like to try and get there around 6:30am if at all possible, otherwise you get stuck in traffic pretty bad heading towards Bellevue!
See Ya Bill
See Ya Bill
2004mysticobra
New Member
blown04snake
New Member
Bullitt2343 said:
Kerry - a couple of us are heading up Wednesday , leaving Beaverton around 12:00 noon. We are staying at the Days Inn, Bellevue. Will be at the track at O dark thirty. We usually beat the security guard there.
bill89saleen304
Member
2004mysticobra said:
Not sure why they didn't post a time, We usually leave BCC around 8:30-8:45am. My advice to everyone is to try and get there around 6:30am or else
you wiil be stuck in the morning commute traffic!!! and that is not much fun,
better to be there early than sitting in traffic wondering if you'll get there ontime!
Hope this helps everybody out!
See Ya Bill
her is some info that might help.
Roundup Pony Trails
7/14/2006 9:00:00 AM
Route info/hints:
Leave time from Bellevue Community College is 9:00 AM (first group out). If you have a large group and want to run together (or as much as possible) show up early.
One way trip distance is 50 miles, there will be two (2) gas stops available on the route (easy access).
Projected travel time is 1.5-2 hours to the location of Mud Mountain
Dam/Park.
The park is located just outside of Enumclaw, make sure you have at least a ¼ tank of fuel before entering hwy 410. Gas is available in Enumclaw, but will not be on the direct route.
Contact Mark Wade, 206-790-1473 or Dick Knight, 425-765-5849.
maninblack999 said:
Roundup Pony Trails
7/14/2006 9:00:00 AM
Route info/hints:
Leave time from Bellevue Community College is 9:00 AM (first group out). If you have a large group and want to run together (or as much as possible) show up early.
One way trip distance is 50 miles, there will be two (2) gas stops available on the route (easy access).
Projected travel time is 1.5-2 hours to the location of Mud Mountain
Dam/Park.
The park is located just outside of Enumclaw, make sure you have at least a ¼ tank of fuel before entering hwy 410. Gas is available in Enumclaw, but will not be on the direct route.
Contact Mark Wade, 206-790-1473 or Dick Knight, 425-765-5849.
Similar threads
