• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

My 2.2 KB dyno results....

  • Thread starter Thread starter Screwed2V
  • Start date Start date Oct 10, 2004
  • 1
  • 2
Next
1 of 2 Next Last

Screwed2V

New Member
Aug 6, 2003
1,255
1
0
Misery
Oct 10, 2004
#1
  • Oct 10, 2004
  • #1
I'll just get it out of the way. 15 psi- 615 rwhp/570 rwtq.......15 psi and a shot of nitrous 660 rwhp/698 rwtq. The belt is slipping a bit up top keeping the car from making what we think it'll make which is around what my T Trim combo made...around 660 rwhp but with a ton more torque obviously. This is by far the most fun I've had with the car and definately feels WAY stronger than any of the centrifugal blowers I've had. For those that are thinking of buying the thing when it's released I suggest to do it lol. Fifth gear going up hill is a great passing gear now.

Once again I want to thank everyone at Modular Powerhouse for the great service. They've been the only shop I've trusted since dropping my car off with them last november to touch it and they remain the only one that will touch it even though I'm moving another 200 miles farther away from them than I already am. You couldn't ask for better service or more knowledgable people from a performance shop. I'm pleasantly surprised each and every time I go there. Tim's tune was once again spot on and the car never missed a beat during the 360 mile drive home. The drivability is like stock (with big fookin cams lol). No idle surge, no spitting or sputtering, dead on the money and plenty of power to boot.

Here's the graph for anyone that's interested of the pull with no nitrous.

http://modularmustangs.net/showthread.php?t=8259
 

Screwed2V

New Member
Aug 6, 2003
1,255
1
0
Misery
Oct 10, 2004
#2
  • Oct 10, 2004
  • #2
Here's a pic of the 2.2 installed on the car.....
 

Attachments

  • T&J&2.2KB10-10-04 003.webp
    62.6 KB · Views: 303

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Oct 10, 2004
#3
  • Oct 10, 2004
  • #3
very nice man
 

02LaserRed2V

New Member
Jul 30, 2004
379
1
0
Augusta, GA
Oct 10, 2004
#4
  • Oct 10, 2004
  • #4


Holy jumpin' horny toads, Batman!

How much is that? I know a LOT of pretty pennies.
 
P

Pitch Black

New Member
Jul 17, 2004
369
0
0
TX
Oct 10, 2004
#5
  • Oct 10, 2004
  • #5
615rwhp at only 15psi? DAMN thats amazing! I can't wait to see what this thing does on a 4V
 
E

el_kid_1

New Member
Oct 30, 2003
738
0
0
Puerto Rico
Oct 10, 2004
#6
  • Oct 10, 2004
  • #6
Good God! That thing is amaizing! Have you been to the track yet?
 

Screwed2V

New Member
Aug 6, 2003
1,255
1
0
Misery
Oct 10, 2004
#7
  • Oct 10, 2004
  • #7
el_kid_1 said:
Good God! That thing is amaizing! Have you been to the track yet?
Click to expand...
No sir. Just got it back today.
 
E

el_kid_1

New Member
Oct 30, 2003
738
0
0
Puerto Rico
Oct 10, 2004
#8
  • Oct 10, 2004
  • #8
Can't wait to see the results at the track. Congrats for your new monster!
 

GT2000JAY

Founding Member
Oct 22, 2002
1,344
0
0
Northwest
Oct 10, 2004
#9
  • Oct 10, 2004
  • #9
Simply awesome. Congrats!
 

hotmustang331

Active Member
Apr 29, 2004
2,967
3
48
Bastrop,TX
Oct 10, 2004
#10
  • Oct 10, 2004
  • #10
Wow thats freekin awsome...that KB is awsome, and only with only 15PSI it cant be that hard on a built engine.If they were a little cheaper then I may consider one LOL...but that cash is what really keeps me from getting one on a built engine.
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Oct 10, 2004
#11
  • Oct 10, 2004
  • #11


wanna donate your old KB to me

YOU BETTER GET VIDS OF IT AT THE TRACK
 

Spreadman

two wheels
Founding Member
Nov 29, 1999
10,904
3
0
Houston, TX
Oct 10, 2004
#12
  • Oct 10, 2004
  • #12
I can assure you there will be vids made. The MPH crew are video happy (cough cough Kamran cough).

Awesome combo Kiddo.

The menu options are getting larger over at MPH.

"I'll have the Kidd....over easy."
 

Indiana

New Member
May 6, 2004
286
0
0
Oct 10, 2004
#13
  • Oct 10, 2004
  • #13
:worship:
 

madmatt

Ellis Juan sympathizer
Founding Member
Dec 28, 2002
465
0
16
Lexington, SC
Oct 10, 2004
#14
  • Oct 10, 2004
  • #14
Great numbers Kidd, so now the real question is, how many miles will you actually put on the combo before you yank it off and put some twin hairdryers on it???
 
G

GinoGT

Founding Member
Aug 11, 2002
1,862
0
36
Oct 10, 2004
#15
  • Oct 10, 2004
  • #15
Yeah, I give it 2 months max before he tears it down again and goes with a new setup.

Awesome numbers as always
 

BLK_ROUSH

Founding Member
Feb 5, 2000
1,300
0
36
Newnan, GA
Oct 11, 2004
#16
  • Oct 11, 2004
  • #16
Another satisfied customer .... MPH representin'.
Congrats on the beast.
 
Y

YellowJacketGT

Founding Member
Oct 28, 2002
108
0
0
Oct 11, 2004
#17
  • Oct 11, 2004
  • #17
WOW.. Great numbers.

What size shot did you use?

Did you notice a decrease in intake air temperature with NO2?

I need to find a way to decrease intake temperature. Gets too hot in a 4 gear run. (Forget back to back runs).

Not sure I want to go the water injection root. Unless you use a significant amount of methonal the water causes reduction in HP (air/gas displacement ). You can gain this back by increasing timing.

Seams like NO2 is a common way to cool things down with these blowers...
 
B

Black96Snake

Founding Member
Jul 12, 2000
48
0
0
Auburn, AL, USA
Oct 11, 2004
#18
  • Oct 11, 2004
  • #18
Pitch Black said:
615rwhp at only 15psi? DAMN thats amazing! I can't wait to see what this thing does on a 4V
Click to expand...

First off WAR EAGLE!

Second, according to Tim, the 2V's make more power than the 4V's.
 
G

GinoGT

Founding Member
Aug 11, 2002
1,862
0
36
Oct 11, 2004
#19
  • Oct 11, 2004
  • #19
Isn't the KB for the Cobras already 2.2L or something like that?

As for the amount of power at "only 15psi"......he's got a sweet set of cams, heads, exhaust, etc., so that's going to lower the amount of boost seen, but increase the power.

Boost is a measure of restriction. When you have a huge blower like that only putting out 15psi, you know his intake/exhaust flows a hell of a lot of air.
 

cobra killer

Founding Member
Mar 28, 2001
2,325
0
46
dallas ga
Oct 11, 2004
#20
  • Oct 11, 2004
  • #20
Pitch Black said:
615rwhp at only 15psi? DAMN thats amazing! I can't wait to see what this thing does on a 4V
Click to expand...

03 cobra with 15psi made 576rwhp.So the lil 2v spanked it bad with the same psi.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
I
Fox Questions on my dyno results
  • ItsWay2fast4u
  • Sep 3, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 3, 2018
ItsWay2fast4u
I
J
351w swap in 2004 questions (set up like a 95 Cobra)
  • jonathansw1601
  • Mar 24, 2018
  • 1994 - 1995 Specific Tech
Replies
4
Views
3K
1994 - 1995 Specific Tech Jun 28, 2018
jonathansw1601
J
  • Locked
SOLD 94 Mustang Gt - 306ci, 325rwhp/341rwtq, Afr/fti/edelbrock, 44k Mi
  • GTJake
  • Nov 20, 2016
  • SN95 Mustangs For Sale (1994-04)
Replies
2
Views
4K
SN95 Mustangs For Sale (1994-04) Jan 5, 2017
mustang90
  • Locked
Just Some Suggestion's For Foxes
  • Detroiit
  • Jul 24, 2014
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2014
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?