My AOD trans wont shift out of park???

Ok so here's my situation....

The torque converter is brand new, it was properly seated and all when I installed it on the trans, and the throttle valve cable is properly hooked up...but that shouldn't prevent it from shifting into park even if it wasn't.

The shifter cable is hooked up and it shifts the trans through all the gears but the car doesn't move at all.

I just pulled the pan under the transmission and it doesn't look like there's anything broken, the trans is shifting on the inside also, so idk what to do at this point....

Yes the linkage is hooked up, what I meant by on the inside is that after I dropped the pan I checked out the shift rod n all inside the trans n it's moving properly.... long story short I took the driveshaft n inserted it into the trans n spun it a bit, then pulled the driveshaft back out n started the car n moved it through the gears....the guy who I bought the trans from had installed a new shift kit, and I had put in a new torque converter....so it seems like it just took some time for the fluid to cycle through the trans... I put new fluid in n cycled through the gears n the trans started to shift properly, I didn't think bout it but it makes sense that it would take a lil while for the fluid to circle through the trans.


Anybody have a new shift cable? I just broke mine......lol