• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

My Baby's Evolution

  • Thread starter Thread starter Vettn71
  • Start date Start date Oct 17, 2016
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Oct 17, 2016
#1
  • Oct 17, 2016
  • #1





ive looked at several build threads on this and other sites and they've motivated me to share mine. The first picture is of Baby when I first brought her home. Don't be jealous. Not everyone can afford a custom paint job. What I really like are the bucket seats. Everyone has leather sport seats. How boring!! Check out these beauties in the second photo. Those, my friends are genuine low mile 84 L seats. Not GL, just L, as if there was a competition to see what the lowest cost car could possibly be, and this one won.

Here's a couple more of the exterior.

So, I bought this with genuine US dollars, no engine, no trans, virtually no interior. The last photo is the "interior" as purchased. Sorry some of the photos are sideways. Not sure how to fix. Maybe when I get on a computer, instead of an iPad.
 
Last edited: Oct 18, 2016
Reactions: skyline247, elarm1, krazedstang and 1 other person

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,130
3,103
214
Cedar Rapids, Iowa
Oct 17, 2016
#2
  • Oct 17, 2016
  • #2
And den????
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Oct 17, 2016
#3
  • Oct 17, 2016
  • #3
That interior......i can't even...
 

1990slow50H

Active Member
Jul 16, 2009
66
27
38
Spring Lake MI
Oct 17, 2016
#4
  • Oct 17, 2016
  • #4
Me likey
 
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Oct 17, 2016
#5
  • Oct 17, 2016
  • #5
Looks like my photos had puppies! Not sure how that happened. Tried to delete the duplicates, but can't on this Apple wonder.



I couldn't let Baby languish, so my plan is to do a Mod Fox using my 1996 GT as a donor vehicle. The first photo is my 96. Looks pretty good, right? This is when I first bought it. The PO said he couldn't get to the rear header bolts, so they were left out. This was true. It was noisy as all get out. What he didn't tell me is that all three of the midpipe to header bolts were also out. REALLY LOUD!!! Supposedly, it had a 4.6 stroker, fully forged PI motor. Not quite. No stroker. Plus, whoever did the machine work on the engine must have used a hatchet to bore the cylinders. They had 0.008" clearance, minimum!

After I got the exhaust bolted up, I found it had quite a bit of noise going on. I took it to two shops and they both said they thought it was piston slap. The noise kept getting worse, so I made the decision to pull the engine and send it to my Father-in-law, who owns an engine machine shop in GA. I bought a Cobra Teksid block and sent it to him, also. He found a scored cam journal, and a stock Cobra crank. He balanced the rotating assembly, installed all new parts, except for the Manley connecting rods (which were still good), new Wiseco forged pistons, Comp Cams 278 spec cams, ported the heads, three-angle valve job and sent it on to me. On top it has a C&L plenum, PI intake and BBK 75mm throttle body. Had it tuned and it's at 298 hp and 320 lb/ft torque. Not bad for a mod motor.

Where is this thread going? Well, that engine, the T-5 tranny, Team Z K-member, the 3:73,rear, etc, etc are all going into Baby. I'll also use the 96 wiring harness, computer, dash, gauges, seats and whatever to finish it out. I think it should make a pretty sharp-running package in that 84 notch.
 
Last edited: Oct 18, 2016
Reactions: Davedacarpainter
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Oct 17, 2016
#6
  • Oct 17, 2016
  • #6




Been working on Baby's bottom, or is that body? Can't tell, yet. Trunk was so far out of whacky I had to grab the hinges at the curve (per suggestion from a member here) and bend them to try to get some semblance of alignment. The trunk lid was pushed over to the left side so far it overlapped. Here's how it looks now. Not too bad

I took the windshield out. Actually, that's being charitable. I got inside with a putty knife and a no-bounce soft mallet and at the very first micro-inch of penetration, the windshield busted. Not a loss, as I managed to crack it putting on the new hood first. Since I could not get the putty knife any further around the windshield (cracking it as I went), I decided to fold the windshield so I could get a better angle. The windshield virtually exploded! I spent the next hour vacuuming teeny tiny slivers of glass from EVERYWHERE! Add that to things not to do again.

The second photo is about how it sits at the moment. I've bought a transmission tunnel and steering column bearing plate from a 96 Mustang, both of which I will need to complete the project. The body work is tedious, but there's no real rust in the car, except surface rust. I am thinking a need to sandblast some of the body panels to clean them up for paint. Not sure what color to go with. I'm leaning towards a dark grey, but my son would like to see Calypso Green. idk

Jim
 

95BlueStallion

My assy trans to myself
15 Year Member
Feb 22, 2007
5,130
3,103
214
Cedar Rapids, Iowa
Oct 17, 2016
#7
  • Oct 17, 2016
  • #7
Cool man, I like it. And on the bright side, its already swapped to 5 lug!
 
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Oct 18, 2016
#8
  • Oct 18, 2016
  • #8
I knew baby was a turd-biscuit when I bought her. If I had bought a real car I would have to do the same things to it that has been done to Baby. I'm actually ahead going this route, since a ModFox was my intent from the beginning. I've seen more of my youngest son since I bought this than I had the previous year. He's as excited about it as I am. I truly passed on my sickness to him. Of course, being single he doesn't have the entanglements that my oldest son does. No. 2 has really been a big help.

I had some tin-canning of the roof going on. The PO owner had stored gallon buckets of paint on the roog and dented it in around the edge. I got most of it out, but need to buy that Eastwood dent puller.



Here's a shot of my 96 with the 10.5 rears

 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Oct 18, 2016
#9
  • Oct 18, 2016
  • #9
Here,...Seems prudent that I link this to you.
http://www.stangnet.com/mustang-forums/threads/2v-mod-motor-swap-into-a-fox.851015/
That red car seems way too nice to use as a donor,....hopefully, you're gonna cannibalize every single part of it including the full interior?

You do realize that your spindles are potential "No-Go's" for this swap right?
 
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Oct 19, 2016
#10
  • Oct 19, 2016
  • #10
@madmike1157

Maximum Motorsports, among others say they will work with an aftermarket k-member, which I have (Team Z). I think I need to use Taurus tie rod ends, also, but I need to double check that.

I know the car looks good ......... from 50 ft. away. The paint is cracking and chipping and on the right quarter panel there's been some Bondo repair that's been painted over with rattle can red, then its peeling. That's what motivated me to do this. The amount of work to do a full-on color change is not that much more than doing the ModFox. I appreciate the link, though. Good stuff there

Regards
Jim
 
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Oct 22, 2016
#11
  • Oct 22, 2016
  • #11
It's going to be a while before I can post again. I'm having shoulder replacement surgery next Wednesday. I'm thinking it might be 6 to 8 weeks before I can even think about getting to it again. My youngest son has been helping. He's doing some work on it this weekend while I'm out of state. Maybe I can post up a couple pictures if he makes any progress.

Jim
 
Reactions: krazedstang

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Oct 22, 2016
#12
  • Oct 22, 2016
  • #12
Good luck with you surgery. I hope it goes well.

I like the idea of your plans and look forward to seeing the progress once your not gimped up from your surgery.
 
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Oct 22, 2016
#13
  • Oct 22, 2016
  • #13
I know it's going to be fugly. I usually heal up pretty quick, but this is pretty major. Thanks for the kindness

Jim
 
Reactions: Davedacarpainter
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Nov 3, 2016
#14
  • Nov 3, 2016
  • #14
Back to work on Monday. My son did manage to get a bit done on the car last weekend

Jim
 
Reactions: skyline247, Davedacarpainter and Mustang5L5

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Nov 3, 2016
#15
  • Nov 3, 2016
  • #15
I like this project. That 96 seems like a nice car though, but a mod fox is cool.


Sent from my iPhone using Tapatalk
 

HotFox

15 Year Member
Jan 5, 2009
1,069
701
164
SE Michigan
Nov 3, 2016
#16
  • Nov 3, 2016
  • #16
F-that 96! I only like the parts off the SN95 for the fox. The style blah...
 
Reactions: Davedacarpainter
V

Vettn71

Advanced Member
Jan 3, 2014
273
154
74
Nov 7, 2016
#17
  • Nov 7, 2016
  • #17
I'm okay with the 96, but it's body isn't as good as the 84, and the paint really is a single-stage Earl Scheib special. Where it was hit on the right quarter the PO just rattle bombed it. So, the 96 could be made whole; I just don't hunk the ModFox thing is more fun and more of a challenge.

And yes, it will be my DD. The 96 has been pulling that duty the last two years

Jim
 

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,135
10,754
213
polk county florida
Nov 7, 2016
#18
  • Nov 7, 2016
  • #18
Time to retire the 96 and build that square lite car!
 
You must log in or register to reply here.

Similar threads

Getting my car decent. Looking for thoughts on this long list.
  • Wayne Waldrep
  • Jun 10, 2019
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
50
Views
11K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 17, 2020
Mustang5L5
B
  • Locked
Expired Procharged Cammed Gt/cs Loaded And Clean
  • BalesTeam
  • Dec 22, 2015
  • S197 Mustangs For Sale (2005-14)
Replies
0
Views
2K
S197 Mustangs For Sale (2005-14) Dec 22, 2015
BalesTeam
B
C
  • Locked
SOLD New 2015 Gt Premium Mustang W/ Every Option $43,500
  • Connor00
  • Feb 24, 2015
  • S197 Mustangs For Sale (2005-14)
Replies
2
Views
3K
S197 Mustangs For Sale (2005-14) Mar 3, 2015
Connor00
C
B
  • Locked
Expired 00/03 Cobra Clone Fully Built Street/track Monster Kenne Bell
  • BOSS GT
  • Aug 20, 2013
  • SN95 Mustangs For Sale (1994-04)
Replies
4
Views
12K
SN95 Mustangs For Sale (1994-04) Oct 29, 2013
BOSS GT
B
9
  • Locked
Expired 94gt Bolt Ons Nj $1000
  • 95PGTTech
  • Dec 19, 2013
  • SN95 Mustangs For Sale (1994-04)
Replies
0
Views
11K
SN95 Mustangs For Sale (1994-04) Dec 19, 2013
95PGTTech
9
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?