• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

MY CAR BACKFIRES.....PLEASE HELP

  • Thread starter Thread starter bowtietrader
  • Start date Start date Sep 26, 2004
B

bowtietrader

New Member
Aug 14, 2004
68
0
0
Sep 26, 2004
#1
  • Sep 26, 2004
  • #1
I HAVE A LOT OF MODS, STOCK INJECTORS AND I HAVE MY FUEL PRESSURE AT 40 AND TIMING SET AT 8 DEG..I HAVE HEADS CAM INTAKE FUEL PUMP, ALL KINDS OF MORE MODS..
BUT WHEN I FLOOR MY GAS PEDAL, THE CAR BACKFIRES THEN TAKES OFF, BUT IF I EASE INTO THE PEDAL THEN IT DONT BACKFIRE AT ALL..
I PUT ALL KINDS OF MONEY INTO THIS AND STILL CANT DRIVE IT.
ANY IDEAS OR ?"S PLEASE POST..
THANKS
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 26, 2004
#2
  • Sep 26, 2004
  • #2
codes? MAF clean, vac ok, etc?

good luck.
 
N

NightStalkersSO

New Member
Aug 23, 2004
62
0
0
Gilbert, Az
Sep 26, 2004
#3
  • Sep 26, 2004
  • #3
Only 40 psi with stock injectors seems low if you have heads and stuff on the car....also...why only 8 degrees??? 10 is stock on mustangs...then bump up the fuel pressure, make sure there's no detonation
 

blkstangman88

New Member
Apr 6, 2004
646
0
0
Sep 26, 2004
#4
  • Sep 26, 2004
  • #4
i agree with the 40 psi, y is it so low, try raising it some.
 
B

bowtietrader

New Member
Aug 14, 2004
68
0
0
Sep 26, 2004
#5
  • Sep 26, 2004
  • #5
ok, well i was going to spray so i heard 8 was good fro spray... also i removed all my emissions stuff, so theres not much vacuum lines there.. should i try to put 30#ers in there because i have them.. also i tried to get codes and it wasnt throwing nothing.. what about my distributor???
 
9

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
1
46
Big Stone Gap, VA
Sep 26, 2004
#6
  • Sep 26, 2004
  • #6
Hmm

Raise the Timming too.
Play with FP first then go from there.
 
9

92GreenGT

PEAT
Founding Member
Jul 18, 2002
2,085
1
46
Big Stone Gap, VA
Sep 26, 2004
#7
  • Sep 26, 2004
  • #7
What h/c/i combo do you have?
 
B

bowtietrader

New Member
Aug 14, 2004
68
0
0
Sep 26, 2004
#8
  • Sep 26, 2004
  • #8
i have trickflow KPI heads,gt-40 upper/lower, E303 cam... 1.6 r/r
255 pump,
 
You must log in or register to reply here.

Similar threads

1
Engine 91 mustang 302 Low acceleration car backfires pops and acts like it doesn’t want to take fuel
  • 1991Fox5.0
  • Oct 4, 2025
  • Fox 5.0 Mustang Tech
Replies
16
Views
1K
Fox 5.0 Mustang Tech Oct 6, 2025
1991Fox5.0
1
M
Electrical 93 5.0 No Injector Pulse
  • machinermac
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
15
Views
385
Fox 5.0 Mustang Tech Aug 1, 2026
Willybill32
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
399
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
W
Engine My engine dies after running 10 to 15 minutes under high heat.
  • Wylieone
  • Jun 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
257
Fox 5.0 Mustang Tech Jun 22, 2026
Mustang5L5
M
93 5.0 Microsquirt with Stage 3 trickflow tuning issues
  • marxpreston11
  • Jun 22, 2026
  • Digital Self-tuning Forum
  • 2 3 4
Replies
68
Views
2K
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?